Hyundai ix20 2010-2015 Manuel du propriétaire

PDF Download
Document
Manuel HYUNDAI du propriétaire | IA Chat & PDF | Fixfr

User questions

T O

Jennifer T.

Where are the windshield wiper controls located?
No votes
The windshield wiper controls are on the dashboard, operated by a lever on the steering column.
A X

Michael A.

How to unlock the door in an emergency when the child safety lock is active?
No votes
In the event of an electrical malfunction of the central door locking button, emergency opening is possible using the ignition key in the external cylinder. However, the provided information does not specify emergency unlocking procedures when the child safety lock is activated.
V P

Linda V.

What does the oil pressure warning light on the instrument cluster indicate?
No votes
The oil pressure warning light on the instrument cluster indicates a need to check the oil level using the oil dipstick. For a complete explanation, consult the owner's manual for your specific Hyundai model, which should detail the meaning of all warning lights and how to address them.
W P

James W.

How to remove the engine oil light?
No votes
It is important not to ignore an engine oil light. It indicates a potential problem that can seriously damage your engine if you don't fix it quickly. First, check the oil level: Open the hood and locate the oil dipstick. Pull out the dipstick and wipe it with a clean cloth. Insert it completely and remove it again. Check the oil level on the dipstick. If the level is low, you need to add oil. Second, check if the oil is clean: If the oil level is low, check the color of the oil on the dipstick. The oil should be amber or light brown in color. If it is black, it is probably contaminated and needs to be drained and replaced. Third, identify the cause of the indicator light: The engine oil light may flash simply because the oil level is too low. An oil leak may also be the cause.
W P

James W.

How to remove the engine oil light after an oil change?
No votes
The engine oil light usually goes off on its own after you have performed an oil change and have returned the oil level to the correct height. However, check the oil level after draining, using the dipstick to ensure it is between the "Min" and "Max" marks. Restart the engine. The oil light should go out after a few seconds if everything is in order. Let the engine idle for a few minutes to allow the oil pressure sensor to stabilize. If the oil light persists, a defective oil pressure sensor may be the problem.
Preparing document for printing…
0%