Extel Lesly User guide

PDF
Document
Extel Lesly User guide | Fixfr
/

User questions

V P

Mary V.

How to pair the monitor with the outdoor station?

The monitor and outdoor station connect wirelessly. To perform manual pairing, select channel CH1 on the monitor, press the call button on the outdoor station, and then press the pairing button on the electronic box within 20 seconds. Maintain a distance of at least 3 meters between components during testing to prevent signal saturation.

V P

Mary V.

How to pair the monitor with the outdoor station?

To synchronize the devices, select channel CH1 on the monitor, then press the call button on the outdoor station followed by the pairing button on the electronic unit within 20 seconds. The screen will display 'PAIRED' once successful. It is recommended to maintain a minimum distance of 3 meters between the components during testing.

V P

Mary V.

How to manually pair the monitor with the outdoor station?

Select channel CH1 on the monitor, then press the call button on the outdoor station followed by the pairing button on the electronic box within 20 seconds. Ensure a minimum distance of 3 meters between the units during testing to avoid saturation.

V P

Mary V.

How to pair the monitor with the outdoor caller station?

Select channel CH1 on the monitor to start the pairing process. Press the call button on the outdoor station, then press the pairing button on the electronic box within 20 seconds. Ensure a minimum distance of 3 meters between the devices during the procedure to avoid signal saturation.

V P

Mary V.

How to pair the monitor with the outdoor station?

Select channel CH1 on the monitor. Press the call button on the outdoor station, then press the pairing button on the electronic box within 20 seconds. The screen will display 'PAIRED' upon successful connection.

V P

Mary V.

How to pair a monitor with a door station?

Pairing is performed wirelessly. Select channel CH1 on the monitor, then press the call button on the door station followed by the pairing button on the electronic box within 20 seconds. Maintain a minimum distance of at least 3 meters between the units during testing.

V P

Mary V.

How to pair the monitor with the door station?

Select channel CH1 on the monitor. Press the call button on the door station, then press the pairing button located on the electronic box. The screen will display the result of the pairing. Maintain a minimum distance of 3 meters between the components during testing.

Preparing document for printing…
0%