GMC Terrain 2012 Mode d'emploi

PDF Download
Document
GMC Terrain 2012 Mode d'emploi | Fixfr

User questions

Q R

James Q.

How to reset the warning lights that appear on the vehicle?
The manual mentions reset procedures for certain warning lights: 1. **Engine Oil Life Indicator:** The system calculates oil life based on vehicle use and displays a message when it's time for an oil and filter change. Reset the system to 100% after an oil change. The reset procedure is detailed in the document. 2. **Tire Pressure Monitoring System (TPMS):** The TPMS warning icon indicates significant pressure loss. The icon remains on until the pressure is corrected. The system must be maintained properly.
Q R

James Q.

How to access notifications that appear when starting the vehicle after they disappear from the screen?
The manual mentions the Driver Information Center (DIC) as a place to view vehicle messages, however, it is not specified if the notifications displayed at start-up are stored there.
Q R

James Q.

Where is the Driver Information Center (DIC) located and how is it accessed?
According to the manual, the DIC screen is located in the center of the instrument panel. The DIC buttons are usually located below the climate control system. Use the MENU button to access different menus (trip/fuel and vehicle information) and the arrow buttons (Q or R) to navigate the options.
Q R

James Q.

What to do if the air conditioning stops working after starting the car?
The manual provides information on the climate control system. Here are a few things to check, based on the available information: 1. **Air Conditioning System:** Make sure the system is activated and set to the desired mode (heating, cooling, etc.). 2. **Vents:** Check that the vents are not blocked and are correctly oriented.
Q R

James Q.

Where is the Driver Information Center (DIC) located and how is it accessed?
The DIC screen is located in the center of the instrument panel. The DIC buttons are generally located below the climate control system. The MENU button accesses the different menus (trip/fuel and vehicle information), and the arrow buttons navigate the options.
Q R

James Q.

What steps can be taken when the air conditioning stops working after the car is started?
Ensure the system is activated and set to the desired mode (heating, cooling, etc.). Verify that the vents are not obstructed and are correctly oriented. While not specified in the document, a blown fuse could potentially affect the air conditioning.
R R

John R.

What could cause an air conditioning system to stop working shortly after being started?
The problem could be related to several factors, including a blown fuse interrupting power or incorrect system settings. Examine the air conditioning control system settings to ensure they are correct and that the system is not in recirculation or defrost mode. If the problem persists, an inspection by a qualified technician may be necessary.
Preparing document for printing…
0%