▼
Scroll to page 2
of
16
GF Piping Systems Welding Table Schweiss-Tabelle Table de Soudage TOP - ECOS 250 Butt-Fusion Machine Stumpfschweissmaschine Machine à Souder Bout à Bout Fusion data / Schweissdaten / Parametrès de soudage 1. Fusion data / Schweissdaten / Param. de soudage 1.1 Heating element butt-fusion of PE Heizelement-Stumpfschweissen von PE Soudage bout à bout pour PE Fusion chart according to DVS 2207-1 Schw eisstabelle entsprechend DVS 2207-1 Table de Soudage conformément aux DVS 2207-1 Heating element temperature: 220°C ± 10°C Heizelementtemperatur : 220°C ± 10°C Température de l’élément chauffant: 220°C ± 10°C Nominal wall thickness 1 2 Equalization Heat soak Bead height on heating element after equalization Heat soak time = 10 x w all thickness Angleichen Nennwanddicke Épaisseur nominale du tuyau Anw ärmzeit = 10 x Wanddicke Formation du bourrelet Chauffage Temps de chauffe= 10 x épaisseur du tuyau P1=0.15N/mm2 P2=0.01N/m m2 Min. [mm] [sec] 0.5 1.0 45 45 – 70 7.0 – 12.0 12.0 – 19.0 19.0 – 26.0 26.0 – 37.0 37.0 – 50.0 1.5 2.0 2.5 3.0 3.5 70 – 120 120 – 190 190 – 260 260 – 370 370 – 500 50.0 – 70.0 70.0 – 90.0 90.0 – 110.0 110.0 – 130.0 4.0 4.5 5.0 5.5 500 – 700 700 – 900 900 –1100 1100 – 1300 [mm] up to 4.5 4.5 – 7.0 4 Changeover Join Anwärmen Wulsthöhe am Heizelement am Ende der Angleichzeit Épaisseur du bourrelet sur la plaque chauffante 3 5 Cooling Time until max pressure reached Fügen Umstellen Transition Zeit bis zur v ollen Druckaufbringung Cooling time at fusion pressure Abkühlen Abkühlzeit unter Fügedruck Augment. de Refroidissement la pression Temps de Temps pour atteindre la pression de soudage refroidissement à la pression de soudage P5=0.15N/mm2 Max. [sec] 5 5– 6 6– 8– 10 – 12 – 16 – 8 10 12 16 20 20 – 25 25 – 30 30 – 35 35 [sec] Min. [min] 5 5– 6 6– 8– 11 – 14 – 19 – 8 11 14 19 25 25 – 35 35 35 35 See next table Fusion data / Schweissdaten / Parametrès de soudage Nominal wall thickness Cooling time at fusion pressure p = 0.15 N/mm2 ± 0.01 depending on the ambient temperature (Ta) Nennwanddicke Abkühlzeit unter Fügedruck p = 0,15 ± 0,01 N/mm² in Abhängigkeit von der Umgebungstemperatur (Ta) Épaisseur nominale du tuyau Temps de refroidissement à la pression p = 0,15 ± 0,01 N/mm² en fonction de la température ambiante (Ta) Ta ≤ 15°C Min. [min] 4.0 4.0 – 6.0 6.0 – 9.5 9.5 – 14 14 – 19 19 – 27 27 – 36 36 – 50 50 – 64 64 – 78 78 – 92 mm up to 4.5 4.5 – 7.0 7.0 – 12.0 12.0 – 19.0 19.0 – 26.0 26.0 – 37.0 37.0 – 50.0 50.0 – 70.0 70.0 – 90.0 90.0 – 110.0 110.0 – 130.0 15°C < Ta ≤ 25°C Min. [min] 5.0 5.0 – 7.5 7.5 – 12 12 – 18 18 – 24 24 – 34 34 – 46 46 – 64 64 – 82 82 – 100 100 – 118 Process steps for heating element butt fusion Verfahrensschritte beim Heizelement-Stumpfschweissen Graphique temps/pression pour le soudage bout à bout 1 2 3 4 5 25°C < Ta ≤ 40°C Min. [min] 6.5 6.5 – 9.5 9.5 – 15.5 15.5 – 24 24 – 32 32 – 45 45 – 61 61 – 85 85 – 109 109 – 133 133 – 157 Fusion data / Schweissdaten / Parametrès de soudage t1 Equalization time / Angleichzeit / Temps de formation du bourrelet t2 Heating time / Anwärmzeit / Temps de chauffe t3 Change over time / Umstellzeit / Temps de retrait de l’élément chauffant t4 Fusion pressure build-up time / Fügedruck Aufbauzeit / Temps de augmentation de la pression t5 Cooling time / Abkühlzeit / Temps de refroidissement Heating element butt fusion of PE according to DVS 2207-1 Heizelement-Stumpfschweissen von PE nach DVS 2207-1 / Soudage bout à bout par élément chauffant pour PE conformément aux DVS 2207-1 Ø Outside pipe diameter Rohr - Aussendurchmesser Diamètre extérieur du tuyau e Wall thickness Wanddicke Épaisseur nominale du tuyau A Fusion surface Schweissfläche Surface de soudage P1 Equalization pressure Angleich Druck P2 Heating pressure Anwärmdruck Pression de formation du bourrelet Pression de chauffe P5 Fusion pressure Fügedruck Pression de soudage Ta Ambient Temperature Umgebungstemperatur Température ambiante Fusion data / Schweissdaten / Parametrès de soudage PE (DVS 2207-1) Fusion data / Schweissdaten / Parametrès de soudage PE (DVS 2207-1) Fusion data / Schweissdaten / Parametrès de soudage PE (DVS 2207-1) Fusion data / Schweissdaten / Parametrès de soudage 1.2 Heating element butt-fusion of PP Heizelement-Stumpfschweissen von PP Soudage bout à bout pour PP Fusion chart according to DVS 2207-11 Schw eisstabelle entsprechend DVS 2207-11 Table de Soudage conformément aux DVS 2207-11 Nominal wall thickness 1 2 Equalization Heat soak Bead height on heating Heat soak time = 10 x element after equalization w all thickness Angleichen Nennwanddicke Épaisseur nominale du tuyau Wulsthöhe am Heizelement am Ende der Angleichzeit Formation du bourrelet Épaisseur du bourrelet sur la plaque chauffante P1=0.10N/mm2 [mm] 3 Min. [mm] 4 Join Change-over Fügen Anwärmen Anw ärmzeit = 10 x Wanddicke Umstellen Chauffage Temps de chauffe= 10 x épaisseur du tuyau Time until max pressure reached Transition Cooling time at fusion pressure Abkühlen Zeit bis zur v ollen Abkühlzeit unter Druckaufbringu Fügedruck ng Augment. Refroidissede ment la pression Temps de Temps pour atteindre la pression de soudage P2=0.01N/mm 2 [sec] 5 Cooling refroidissement à la pression de soudage P5=0.10N/mm2 Max. [sec] [sec] Fino a 4.5 4.5 – 7.0 7.0 – 12.0 0.5 0.5 1.0 up to 53 53 – 81 81 – 135 5 5–6 6–7 6 6–7 7 – 11 12.0 – 19.0 1.0 135 – 206 7–9 11 – 17 19.0 – 26.0 26.0 – 37.0 1.5 2.0 206 – 271 271 – 362 9 – 11 11 – 14 17 – 22 22 – 32 37.0 – 50.0 2.5 362 – 450 14 – 17 32 – 43 50.0 – 70.0 3.0 450 – 546 17 – 22 43 Min. [min] See next table Fusion data / Schweissdaten / Parametrès de soudage Nominal wall thickness Cooling time at fusion pressure p = 0.10 N/mm2 ± 0.01 depending on the ambient temperature (Ta) Nennwanddicke Abkühlzeit unter Fügedruck p = 0,10 ± 0,01 N/mm² in Abhängigkeit von der Umgebungstemperatur (Ta) Épaisseur nominale du tuyau mm up to 4.5 4.5 – 7.0 7.0 – 12.0 12.0 – 19.0 19.0 – 26.0 26.0 – 37.0 37.0 – 50.0 50.0 – 70.0 Temps de refroidissement à la pression p = 0,10 ± 0,01 N/mm² en fonction de la température ambiante (Ta) Ta ≤ 15°C Min. [min] 4.0 4.0 – 6.0 6.0 – 9.5 9.5 – 14 14 – 19 19 – 27 27 – 36 36 – 50 15°C < Ta ≤ 25°C Min. [min] 5.0 5.0 – 7.5 7.5 – 12 12 – 18 18 – 24 24 – 34 34 – 46 46 – 64 25°C < Ta ≤ 40°C Min. [min] 6.5 6.5 – 9.5 9.5 – 15.5 15.5 – 24 24 – 32 32 – 45 45 – 61 61 – 85 Process steps for heating element butt fusion Verfahrensschritte beim Heizelement-Stumpfschweissen Graphique temps/pression pour le soudage bout à bout Fusion data / Schweissdaten / Parametrès de soudage t1 Equalization time / Angleichzeit / Temps de formation du bourrelet t2 Heating time / Anwärmzeit / Temps de chauffe t3 Change over time / Umstellzeit / Temps de retrait de l’élément chauffant t4 Fusion pressure build-up time / Fügedruck Aufbauzeit / Temps de augmentation de la pression t5 Cooling time / Abkühlzeit / Temps de refroidissement Heating element butt fusion of PP according to DVS 2207-11 Heizelement-Stumpfschweissen von PP nach DVS 2207-11 Soudage bout à bout par élément chauffant pour PP conformément aux DVS 2207-11 Ø Outside pipe diameter Rohr - Aussendurchmesser Diamètre extérieur du tuyau e Wall thickness Wanddicke Épaisseur nominale du tuyau A Fusion surface Schweissfläche Surface de soudage P1 Equalization pressure Angleich Druck Pression de formation du bourrelet P2 Heating pressure Anwärmdruck Pression de chauffe P5 Fusion pressure Fügedruck Pression de soudage Fusion data / Schweissdaten / Parametrès de soudage P P (DVS 2207-11) Fusion data / Schweissdaten / Parametrès de soudage P P (DVS 2207-11) Fusion data / Schweissdaten / Parametrès de soudage Fusion data / Schweissdaten / Parametrès de soudage GF Piping Systems Worldwide at home Our sales companies and representatives ensure local customer support in over 100 countries www.gfps.com Argentina / Southern South America Georg Fischer Central Plastics Sudamérica S.R.L. Buenos Aires, Argentina Phone +54 11 4512 02 90 [email protected] www.gfps.com/ar Finland Georg Fischer AB 01510 VANTAA Phone +358 (0) 9 586 58 25 Fax +358 (0) 9 586 58 29 [email protected] www.gfps.com/fi Australia George Fischer Pty Ltd Riverwood NSW 2210 Australia Phone +61 (0) 2 9502 8000 [email protected] www.gfps.com/au France Georg Fischer SAS 95932 Roissy Charles de Gaulle Cedex Phone +33 (0) 1 41 84 68 84 [email protected] www.gfps.com/fr Austria Georg Fischer Rohrleitungssysteme GmbH 3130 Herzogenburg Phone +43 (0) 2782 856 43-0 [email protected] www.gfps.com/at Germany Georg Fischer GmbH 73095 Albershausen Phone +49 (0) 7161 302-0 [email protected] www.gfps.com/de Georg Fischer Fittings GmbH 3160 Traisen Phone +43 (0) 2762 90300 [email protected] www.fittings.at India Georg Fischer Piping Systems Ltd 400 076 Mumbai Phone +91 224007 2001 [email protected] www.gfps.com/in Belgium / Luxembourg Georg Fischer NV/SA 1070 Bruxelles/Brüssel Phone +32 (0) 2 556 40 20 [email protected] www.gfps.com/be Brazil Georg Fischer Sist. de Tub. Ltda. 04795-100 São Paulo Phone +55 (0) 11 5525 1311 [email protected] www.gfps.com/br Canada Georg Fischer Piping Systems Ltd Mississauga, ON L5T 2B2 Phone +1 (905) 670 8005 Fax +1 (905) 670 8513 [email protected] www.gfps.com/ca China Georg Fischer ­Piping Systems Ltd Shanghai 201319 Phone +86 21 3899 3899 [email protected] www.gfps.com/cn Chinaust Plastics Corp. Ltd. Songlindian, Zhuozhou city, Hebei province, China, 072761 Phone +86 312 395 2000 Fax +86 312 365 2222 [email protected] www.chinaust.com.cn Denmark / Iceland Georg Fischer A/S 2630 Taastrup Phone +45 (0) 70 22 19 75 [email protected] www.gfps.com/dk Italy Georg Fischer S.p.A. 20063 Cernusco S/N (MI) Phone +39 02 921 861 [email protected] www.gfps.com/it Georg Fischer TPA S.r.l. IT-16012 Busalla (GE) Phone +39 010 962 47 11 [email protected] www.gfps.com/it Japan Georg Fischer Ltd 556-0011 Osaka, Phone +81 (0) 6 6635 2691 [email protected] www.gfps.com/jp Korea Georg Fischer Piping Systems 271-3 Seohyeon-dong Bundang-gu Seongnam-si, Gyeonggi-do Seoul 463-824 Phone +82 31 8017 1450 Fax +82 31 8017 1454 [email protected] www.gfps.com/kr Malaysia George Fischer (M) Sdn. Bhd. 40460 Shah Alam, Selangor Darul Ehsan Phone +60 (0) 3 5122 5585 [email protected] www.gfps.com/my Mexico / Northern Latin America Georg Fischer S.A. de C.V. Apodaca, Nuevo Leon CP66636 Mexico Phone +52 (81) 1340 8586 Fax +52 (81) 1522 8906 [email protected] www.gfps.com/mx Middle East Georg Fischer Piping Systems (Switzerland) Ltd Dubai, United Arab Emirates Phone +971 4 289 49 60 [email protected] www.gfps.com/int Netherlands Georg Fischer N.V. 8161 PA Epe Phone +31 (0) 578 678 222 [email protected] www.gfps.com/nl Georg Fischer Waga N.V. NL-8160 AG Epe Phone +31 (0) 578 678 378 [email protected] www.waga.nl New Zealand Georg Fischer Ltd 13 Jupiter Grove, Upper Hutt 5018 PO Box 40399, Upper Hutt 5140 Phone +64 (0) 4 527 9813 [email protected] www.gfps.com/nz Norway Georg Fischer AS 1351 Rud Phone +47 67 18 29 00 [email protected] www.gfps.com/no Poland Georg Fischer Sp. z o.o. 05-090 Sekocin Nowy Phone +48 (0) 22 31 31 0 50 [email protected] www.gfps.com/pl Romania Georg Fischer Piping Systems (Switzerland) Ltd 020257 Bucharest - Sector 2 Phone +40 (0) 21 230 53 80 [email protected] www.gfps.com/int Russia Georg Fischer Piping Systems (Switzerland) Ltd Moscow 125047 Phone +7 495 258 60 80 [email protected] www.gfps.com/ru Singapore George Fischer Pte Ltd 11 Tampines Street 92, #04-01/07 528 872 Singapore Phone +65 6747 0611 [email protected] www.gfps.com/sg Spain / Portugal Georg Fischer S.A. 28046 Madrid Phone +34 (0) 91 781 98 90 [email protected] www.gfps.com/es Sweden Georg Fischer AB 117 43 Stockholm Phone +46 (0) 8 506 775 00 [email protected] www.gfps.com/se Switzerland Georg Fischer Rohrleitungssysteme (Schweiz) AG 8201 Schaffhausen Phone +41 (0) 52 631 30 26 [email protected] www.gfps.com/ch Taiwan Georg Fischer Co., Ltd San Chung Dist., New Taipei City Phone +886 2 8512 2822 Fax +886 2 8512 2823 www.gfps.com/tw United Kingdom / Ireland George Fischer Sales Limited Coventry, CV2 2ST Phone +44 (0) 2476 535 535 [email protected] www.gfps.com/uk USA /Caribbean Georg Fischer LLC Tustin, CA 92780-7258 Phone +1 (714) 731 88 00 Toll Free 800/854 40 90 [email protected] www.gfpiping.com Georg Fischer Central Plastics LLC Shawnee, OK 74801 Phone +1 (405) 273 63 02 [email protected] www.centralplastics.com Vietnam George Fischer Pte Ltd 136E Tran Vu, Ba Dinh District, Hanoi Phone +84 4 3715 3290 Fax +84 4 3715 3285 International Georg Fischer Piping Systems (Switzerland) Ltd 8201 Schaffhausen/Switzerland Phone +41 (0) 52 631 30 03 Fax +41 (0) 52 631 28 93 [email protected] www.gfps.com/int The technical data are not binding. They neither constitute expressly warranted characteristics nor guaranteed properties nor a guaranteed durability. They are subject to modification. Our General Terms of Sale apply. Tables_250_GB_D_FR_rev05.doc Code no.: 790151174-5 Georg Fischer Omicron S.r.l. Via Enrico Fermi, 12 I 35030 Caselle di Selvazzano (Padova) – Italy
