Powerplus POWXG50200 BRUSH CUTTER 31CC 4-STROKE Manuel du propriétaire

PDF Download
Document
Powerplus POWXG50200 BRUSH CUTTER 31CC 4-STROKE Manuel du propriétaire | Fixfr

User questions

K Q

Robert K.

What can prevent a brushcutter from starting?
Several factors can prevent the brushcutter from starting. Check the fuel and oil levels, ensuring they are correct. Follow the appropriate starting procedure depending on whether the engine is cold or hot. Check if fuel is visible in the priming bulb after pressing it several times. Inspect the spark plug for damage or erosion, clean it, and ensure the electrode gap is correct. Also, a defective air filter can prevent the engine from starting. The engine should never run without an air filter, as this could damage the piston and/or cylinder.
K Q

Robert K.

How should the air filter be cleaned?
To clean the air filter, open the cover by pressing the locking tab on the top of the air filter housing. Remove the air filter. Clean the filter using compressed air until all dust and debris have been removed, ensuring no dirt or debris enters the carburetor chamber. Replace the air filter and close the cover.
Preparing document for printing…
0%