GF Piping Systems
Welding Table
Schweiss-Tabelle
Table de Soudage
TOP - ECOS 315
Butt-Fusion Machine
Stumpfschweissmaschine
Machine à Souder Bout à Bout
Fusion data / Schweissdaten / Parametrès de soudage
1. Fusion data / Schweissdaten / Param. de soudage
1.1 Heating element butt fusion of PE
Heizelement-Stumpfschweissen von PE
Soudage bout à bout pour PE
Fusion chart according to DVS 2207-1
Schw eisstabelle entsprechend DVS 2207-1
Table de Soudage conformément aux DVS 2207-1
Heating element temperature: 220°C ± 10°C
Heizelementtemperatur : 220°C ± 10°C
Température de l’élément chauffant: 220°C ± 10°C
1
Nominal wall
thickness
2
Épaisseur
nominale du
tuyau
4
Equalization Heat soak
Bead height on
heating element
after equalization
Angleichen
Nennwanddicke
3
Wulsthöhe am
Heizelement am
Ende der
Angleichzeit
Formation
du
bourrelet
Épaisseur du
bourrelet
sur la plaque
chauffante
Heat soak time = 10 x
w all thickness
Join
Change-over
Anwärmen
Anw ärmzeit = 10 x
Wanddicke
Umstellen
Chauffage
Temps de chauffe=
10 x épaisseur du
tuyau
P1=0.15N/m
m2
P2=0.01N/mm 2
[mm]
Min. [mm]
[sec]
up to 4.5
4.5 – 7.0
7.0 – 12.0
12.0 – 19.0
19.0 – 26.0
26.0 – 37.0
37.0 – 50.0
50.0 – 70.0
70.0 – 90.0
90.0 – 110.0
110.0 – 130.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
45
45 – 70
70 – 120
120 – 190
190 – 260
260 – 370
370 – 500
500 – 700
700 – 900
900 –1100
1100 – 1300
5
Cooling
Transition
Time until max
pressure reached
Cooling time at fusion
pressure
Fügen
Abkühlen
Zeit bis zur v ollen
Druckaufbringung
Abkühlzeit unter
Fügedruck
Augment. de
la pression
Refroidissement
Temps pour
atteindre la
pression de
soudage
Temps de
refroidissement à
la pression de
soudage
P5=0.15N/mm2
Max. [sec]
5
5– 6
6– 8
8 – 10
10 – 12
12 – 16
16 – 20
20 – 25
25 – 30
30 – 35
35
[sec]
5
5– 6
6– 8
8 – 11
11 – 14
14 – 19
19 – 25
25 – 35
35
35
35
Min. [min]
See next table
Fusion data / Schweissdaten / Parametrès de soudage
Nominal wall
thickness
Cooling time at fusion pressure p = 0.15 N/mm2 ± 0.01
depending on the ambient temperature (Ta)
Nennwanddicke
Abkühlzeit unter Fügedruck p = 0,15 ± 0,01 N/mm²
in Abhängigkeit von der Umgebungstemperatur (Ta)
Épaisseur
nominale du
tuyau
Temps de refroidissement à la pression p = 0,15 ± 0,01 N/mm²
en fonction de la température ambiante (Ta)
Ta ≤ 15°C
Min. [min]
4.0
4.0 – 6.0
6.0 – 9.5
9.5 – 14
14 – 19
19 – 27
27 – 36
36 – 50
50 – 64
64 – 78
78 – 92
mm
up to 4.5
4.5 – 7.0
7.0 – 12.0
12.0 – 19.0
19.0 – 26.0
26.0 – 37.0
37.0 – 50.0
50.0 – 70.0
70.0 – 90.0
90.0 – 110.0
110.0 – 130.0
15°C < Ta ≤ 25°C
Min. [min]
5.0
5.0 – 7.5
7.5 – 12
12 – 18
18 – 24
24 – 34
34 – 46
46 – 64
64 – 82
82 – 100
100 – 118
25°C < Ta ≤ 40°C
Min. [min]
6.5
6.5 – 9.5
9.5 – 15.5
15.5 – 24
24 – 32
32 – 45
45 – 61
61 – 85
85 – 109
109 – 133
133 – 157
Process steps for heating element butt fusion
Verfahrensschritte beim Heizelement-Stumpfschweissen
Graphique temps/pression pour le soudage bout à bout
1
2
3
4
5
Fusion data / Schweissdaten / Parametrès de soudage
t1 Equalization time / Angleichzeit / Temps de formation du bourrelet
t2 Heating time / Anwärmzeit / Temps de chauffe
t3 Change over time / Umstellzeit / Temps de retrait de l’élément chauffant
t4 Fusion pressure build-up time / Fügedruck Aufbauzeit / Temps de augmentation
de la pression
t5 Cooling time / Abkühlzeit / Temps de refroidissement
Heating element butt fusion of PE according to DVS 2207-1
Heizelement-Stumpfschweissen von PE nach DVS 2207-1
Soudage bout à bout par élément chauffant pour PE conformément
aux DVS 2207-1
Ø
Outside pipe diameter
Rohr - Aussendurchmesser Diamètre extérieur du tuyau
e
Wall thickness
Wanddicke
Épaisseur nominale du
tuyau
Fusion surface
Schweissfläche
Surface de soudage
P1
Equalization pressure
Angleich Druck
Pression de formation du
bourrelet
P2
Heating pressure
Anwärmdruck
Pression de chauffe
P5
Fusion pressure
Fügedruck
Pression de soudage
Ta
Ambient Temperature
Umgebungstemperatur
Température ambiante
Fusion data / Schweissdaten / Parametrès de soudage
PE (DVS 2207-1)
Fusion data / Schweissdaten / Parametrès de soudage
PE (DVS 2207-1)
Fusion data / Schweissdaten / Parametrès de soudage
PE (DVS 2207-1)
Fusion data / Schweissdaten / Parametrès de soudage
Heating element butt fusion of PP
Heizelement-Stumpfschweissen von PP
Soudage bout à bout pour PP
Fusion chart according to DVS 2207-11
Schw eisstabelle entsprechend DVS 2207-11
Table de Soudage conformément aux DVS 2207-11
Nominal wall
thickness
1
2
Equalization
Heat soak
Bead height on heating
Heat soak time = 10 x
element after equalization w all thickness
Angleichen
Nennwanddicke
Épaisseur
nominale du
tuyau
[mm]
Fino a 4.5
3
Anw ärmzeit = 10 x
Wanddicke
Formation du
bourrelet
Chauffage
P1=0.10N/mm2
Min. [mm]
0.5
Temps de chauffe=
10 x épaisseur du
tuyau
P2=0.01N/mm 2
[sec]
up to 53
5
Cooling
Join
Change-over
Anwärmen
Wulsthöhe am
Heizelement am Ende der
Angleichzeit
Épaisseur du bourrelet
sur la plaque
chauffante
4
Umstellen
Transition
Max. [sec]
Time until max
pressure reached
Cooling time at
fusion pressure
Fügen
Abkühlen
Zeit bis zur v ollen
Druckaufbringung
Abkühlzeit unter
Fügedruck
Augment. de
la pression
Refroidissement
Temps pour
atteindre la
pression de
soudage
Temps de
refroidissement à
la pression de
soudage
[sec]
5
6
4.5 – 7.0
7.0 – 12.0
12.0 – 19.0
0.5
1.0
1.0
53 – 81
81 – 135
135 – 206
5–6
6–7
7–9
6–7
7 – 11
11 – 17
19.0 – 26.0
26.0 – 37.0
37.0 – 50.0
50.0 – 70.0
1.5
2.0
2.5
3.0
206 – 271
271 – 362
362 – 450
450 – 546
9 – 11
11 – 14
14 – 17
17 – 22
17 – 22
22 – 32
32 – 43
43
P5=0.10N/mm2
Min. [min]
6
See next table
Fusion data / Schweissdaten / Parametrès de soudage
Nominal wall
thickness
Cooling time at fusion pressure p = 0.10 N/mm2 ± 0.01
depending on the ambient temperature (Ta)
Nennwanddicke Abkühlzeit unter Fügedruck p = 0,10 ± 0,01 N/mm²
in Abhängigkeit von der Umgebungstemperatur (Ta)
Épaisseur
nominale du
tuyau
mm
up to 4.5
4.5 – 7.0
7.0 – 12.0
12.0 – 19.0
19.0 – 26.0
26.0 – 37.0
37.0 – 50.0
50.0 – 70.0
Temps de refroidissement à la pression p = 0,10 ± 0,01
N/mm² en fonction de la température ambiante (Ta)
Ta ≤ 15°C
Min. [min]
4.0
4.0 – 6.0
6.0 – 9.5
9.5 – 14
14 – 19
19 – 27
27 – 36
36 – 50
15°C < Ta ≤ 25°C
Min. [min]
5.0
5.0 – 7.5
7.5 – 12
12 – 18
18 – 24
24 – 34
34 – 46
46 – 64
25°C < Ta ≤ 40°C
Min. [min]
6.5
6.5 – 9.5
9.5 – 15.5
15.5 – 24
24 – 32
32 – 45
45 – 61
61 – 85
Process steps for heating element butt fusion
Verfahrensschritte beim Heizelement-Stumpfschweissen
Graphique temps/pression pour le soudage bout à bout
Fusion data / Schweissdaten / Parametrès de soudage
t1 Equalization time / Angleichzeit / Temps de formation du bourrelet
t2 Heating time / Anwärmzeit / Temps de chauffe
t3 Change over time / Umstellzeit / Temps de retrait de l’élément chauffant
t4 Fusion pressure build-up time / Fügedruck Aufbauzeit / Temps de augmentation
de la pression
t5 Cooling time / Abkühlzeit / Temps de refroidissement
Heating element butt fusion of PP according to DVS 2207-11
Heizelement-Stumpfschweissen von PP nach DVS 2207-11
Soudage bout à bout par élément chauffant pour PP conformément aux DVS 2207-11
Ø
Outside pipe diameter
Rohr - Aussendurchmesser
Diamètre extérieur du tuyau
e
Wall thickness
Wanddicke
Épaisseur nominale du tuyau
A
Fusion surface
Schweissfläche
Surface de soudage
P1
Equalization pressure
Angleich Druck
Pression de formation du bourrelet
P2
Heating pressure
Anwärmdruck
Pression de chauffe
P5
Fusion pressure
Fügedruck
Pression de soudage
Fusion data / Schweissdaten / Parametrès de soudage
PP (DVS 2207-11)
Fusion data / Schweissdaten / Parametrès de soudage
P P (DVS 2207-11)
Fusion data / Schweissdaten / Parametrès de soudage
Fusion data / Schweissdaten / Parametrès de soudage
GF Piping Systems
Worldwide at home
Our sales companies and representatives
ensure local customer support in over 100 countries
www.gfps.com
Argentina / Southern South America
Georg Fischer Central Plastics
Sudamérica S.R.L.
Buenos Aires, Argentina
Phone +54 11 4512 02 90
[email protected]
www.gfps.com/ar
Finland
Georg Fischer AB
01510 VANTAA
Phone +358 (0) 9 586 58 25
Fax
+358 (0) 9 586 58 29
[email protected]
www.gfps.com/fi
Australia
George Fischer Pty Ltd
Riverwood NSW 2210 Australia
Phone +61 (0) 2 9502 8000
[email protected]
www.gfps.com/au
France
Georg Fischer SAS
95932 Roissy Charles de Gaulle Cedex
Phone +33 (0) 1 41 84 68 84
[email protected]
www.gfps.com/fr
Austria
Georg Fischer Rohrleitungssysteme GmbH
3130 Herzogenburg
Phone +43 (0) 2782 856 43-0
[email protected]
www.gfps.com/at
Germany
Georg Fischer GmbH
73095 Albershausen
Phone +49 (0) 7161 302-0
[email protected]
www.gfps.com/de
Georg Fischer Fittings GmbH
3160 Traisen
Phone +43 (0) 2762 90300
[email protected]
www.fittings.at
India
Georg Fischer Piping Systems Ltd
400 076 Mumbai
Phone +91 224007 2001
[email protected]
www.gfps.com/in
Belgium / Luxembourg
Georg Fischer NV/SA
1070 Bruxelles/Brüssel
Phone +32 (0) 2 556 40 20
[email protected]
www.gfps.com/be
Brazil
Georg Fischer Sist. de Tub. Ltda.
04795-100 São Paulo
Phone +55 (0) 11 5525 1311
[email protected]
www.gfps.com/br
Canada
Georg Fischer Piping Systems Ltd
Mississauga, ON L5T 2B2
Phone +1 (905) 670 8005
Fax
+1 (905) 670 8513
[email protected]
www.gfps.com/ca
China
Georg Fischer ­Piping Systems Ltd
Shanghai 201319
Phone +86 21 3899 3899
[email protected]
www.gfps.com/cn
Chinaust Plastics Corp. Ltd.
Songlindian, Zhuozhou city,
Hebei province, China, 072761
Phone +86 312 395 2000
Fax
+86 312 365 2222
[email protected]
www.chinaust.com.cn
Denmark / Iceland
Georg Fischer A/S
2630 Taastrup
Phone +45 (0) 70 22 19 75
[email protected]
www.gfps.com/dk
Italy
Georg Fischer S.p.A.
20063 Cernusco S/N (MI)
Phone +39 02 921 861
[email protected]
www.gfps.com/it
Georg Fischer TPA S.r.l.
IT-16012 Busalla (GE)
Phone +39 010 962 47 11
[email protected]
www.gfps.com/it
Japan
Georg Fischer Ltd
556-0011 Osaka,
Phone +81 (0) 6 6635 2691
[email protected]
www.gfps.com/jp
Korea
Georg Fischer Piping Systems
271-3 Seohyeon-dong Bundang-gu
Seongnam-si, Gyeonggi-do
Seoul 463-824
Phone +82 31 8017 1450
Fax
+82 31 8017 1454
[email protected]
www.gfps.com/kr
Malaysia
George Fischer (M) Sdn. Bhd.
40460 Shah Alam, Selangor Darul Ehsan
Phone +60 (0) 3 5122 5585
[email protected]
www.gfps.com/my
Mexico / Northern Latin America
Georg Fischer S.A. de C.V.
Apodaca, Nuevo Leon
CP66636 Mexico
Phone +52 (81) 1340 8586
Fax
+52 (81) 1522 8906
[email protected]
www.gfps.com/mx
Middle East
Georg Fischer
Piping Systems (Switzerland) Ltd
Dubai, United Arab Emirates
Phone +971 4 289 49 60
[email protected]
www.gfps.com/int
Netherlands
Georg Fischer N.V.
8161 PA Epe
Phone +31 (0) 578 678 222
[email protected]
www.gfps.com/nl
Georg Fischer Waga N.V.
NL-8160 AG Epe
Phone +31 (0) 578 678 378
[email protected]
www.waga.nl
New Zealand
Georg Fischer Ltd
13 Jupiter Grove, Upper Hutt 5018
PO Box 40399, Upper Hutt 5140
Phone +64 (0) 4 527 9813
[email protected]
www.gfps.com/nz
Norway
Georg Fischer AS
1351 Rud
Phone +47 67 18 29 00
[email protected]
www.gfps.com/no
Poland
Georg Fischer Sp. z o.o.
05-090 Sekocin Nowy
Phone +48 (0) 22 31 31 0 50
[email protected]
www.gfps.com/pl
Romania
Georg Fischer
Piping Systems (Switzerland) Ltd
020257 Bucharest - Sector 2
Phone +40 (0) 21 230 53 80
[email protected]
www.gfps.com/int
Russia
Georg Fischer
Piping Systems (Switzerland) Ltd
Moscow 125047
Phone +7 495 258 60 80
[email protected]
www.gfps.com/ru
Singapore
George Fischer Pte Ltd
11 Tampines Street 92, #04-01/07
528 872 Singapore
Phone +65 6747 0611
[email protected]
www.gfps.com/sg
Spain / Portugal
Georg Fischer S.A.
28046 Madrid
Phone +34 (0) 91 781 98 90
[email protected]
www.gfps.com/es
Sweden
Georg Fischer AB
117 43 Stockholm
Phone +46 (0) 8 506 775 00
[email protected]
www.gfps.com/se
Switzerland
Georg Fischer
Rohrleitungssysteme (Schweiz) AG
8201 Schaffhausen
Phone +41 (0) 52 631 30 26
[email protected]
www.gfps.com/ch
Taiwan
Georg Fischer Co., Ltd
San Chung Dist., New Taipei City
Phone +886 2 8512 2822
Fax
+886 2 8512 2823
www.gfps.com/tw
United Kingdom / Ireland
George Fischer Sales Limited
Coventry, CV2 2ST
Phone +44 (0) 2476 535 535
[email protected]
www.gfps.com/uk
USA /Caribbean
Georg Fischer LLC
Tustin, CA 92780-7258
Phone +1 (714) 731 88 00
Toll Free 800/854 40 90
[email protected]
www.gfpiping.com
Georg Fischer Central Plastics LLC
Shawnee, OK 74801
Phone +1 (405) 273 63 02
[email protected]
www.centralplastics.com
Vietnam
George Fischer Pte Ltd
136E Tran Vu, Ba Dinh District, Hanoi
Phone +84 4 3715 3290
Fax
+84 4 3715 3285
International
Georg Fischer
Piping Systems (Switzerland) Ltd
8201 Schaffhausen/Switzerland
Phone +41 (0) 52 631 30 03
Fax
+41 (0) 52 631 28 93
[email protected]
www.gfps.com/int
The technical data are not binding. They neither constitute expressly
warranted characteristics nor guaranteed properties nor a guaranteed durability.
They are subject to modification. Our General Terms of Sale apply.
Tables_315_GB_D_FR_rev05.doc
Code no.: 790152174-5
Georg Fischer Omicron S.r.l.
Via Enrico Fermi, 12
I 35030 Caselle di Selvazzano (Padova) – Italy
">
