User manual | Oxybul Tricycle modulable Wishbone Manuel utilisateur

PDF
Document
User manual | Oxybul Tricycle modulable Wishbone Manuel utilisateur | Fixfr
/

User questions

Z U

Mary Z.

How to assemble the handlebar?

To assemble the handlebar, follow these steps: 1. Insert the handlebar into the holes of the fork, the rubber rings, and the collar. 2. Ensure the handlebar is properly seated in the holes of the fork and the collar. 3. Tighten the two screws. 4. Verify that the grips are firmly in place, as they are essential for safety.

Z U

Mary Z.

How to assemble the handlebar?

Insert the handlebar into the holes of the fork, the rubber rings, and the collar. Secure the assembly by tightening the two screws and verify that the handles are held firmly in place to ensure safety.

Z U

Mary Z.

How to assemble the handlebar?

To assemble the handlebar, insert it into the fork holes, the rubber rings, and the bushing. Screw the two screws. Finally, ensure the handles are firmly in place for safety.

Z U

Mary Z.

How to assemble the handlebar?

  1. Insert the handlebar into the holes of the fork, the rubber rings, and the collar. 2. Insert the handlebar into the holes of the fork and the collar. 3. Tighten the two screws. 4. Verify that the handles are firmly in place to ensure safety.
Z U

Mary Z.

How to assemble the handlebar?

Insert the handlebar through the holes in the fork, the rubber rings, and the sleeve. Secure it by tightening the two screws and verify that the handles are firmly in place to ensure safety.

Z U

Mary Z.

How to assemble the handlebar?

Insert the handlebar into the holes of the fork, the rubber rings, and the bushing. Secure it by screwing in the two screws and verify that the handles are firmly in place for safety.

Preparing document for printing…
0%