Midmark B 23 Manuel utilisateur

PDF
Document
MIDMARK B6, B18, B23 Manuels | Chat IA & PDF | Fixfr
/

User questions

F N

Mary F.

What does the error message AL0504 mean, and what steps should be taken to address it?

The error message AL0504 indicates a power supply fault or a thermostat issue at the sensor. First, make sure the power cord is correctly plugged into both the autoclave and the electrical outlet, and that the outlet is working properly. If the problem persists, it's recommended to contact a qualified technician for diagnosis and repair.

F N

Mary F.

How does one specifically check the thermostat?

Checking a thermostat generally requires specialized equipment and technical knowledge; therefore, consulting a qualified professional to diagnose and repair the autoclave's thermostat is advisable.

G S

James G.

What does the 'BAD Water' error indicate during water loading?

The 'BAD Water' error during water loading can be due to a clogged bacteriological filter or issues with the loading pumps. Check these components to identify and resolve the problem.

P E

John P.

What are the steps to operate the MD18 sterilizer for a sterilization cycle?

Fill the clean water tank with distilled or demineralized water and place the instruments into the chamber. Close the door, select the appropriate cycle on the control panel according to the instrument type, and press the start button.

P E

John P.

How to operate the MD18 sterilizer?

Fill the clean water tank with distilled or demineralized water. Place the instruments in the chamber using the provided accessories, close the door, select the appropriate cycle on the command panel, and start the process.

P E

John P.

How to perform a standard sterilization cycle?

Fill the clean water tank with distilled or demineralized water, load the instruments into the chamber, and close the door. Select the appropriate cycle on the control panel and press the start button.

Preparing document for printing…
0%