DESCRIPTION
AMC610 is a six headphones distribution amplifier rack unit. This unit allows you to feed six headphones
from one or more stereo modulation line inputs (Impedance should be from 8 Ohms to 600 Ohms).
Independent volume control on each headphone.
Headphone output 1 available on the front panel.
Our special block diagram configuration allows flexible configurations with front panel access: For each amplifier, it is possible to choose either the modulation from the channel situated directly to the left, or the modulation from each channel input (rear panel).
Configuration examples:
One modulation routed to six headphones.
Two different modulations routed to two groups of three headphones.
Three different signals routed to three groups of two headphones.
Six different modulations routed to six headphones.
One modulation routed to two headphones and one modulation routed to four headphones.
The AMC 610 has an order input with an automatic gain reduction of the audio modulation routed to the headphones.
Order feeds can be routed either to all headphones, or to headphone 1 only (internal programming).
General balanced stereo input on XLR, or unbalanced on RCAs.
Direct unbalanced stereo input (for each channel) on RCAs.
XLR balanced Order input.
RCA unbalanced Order input.
Stereo 1/4" Jack headphone outputs.
USES
Headphone modulation dispatch in broadcast studios.
Headphone modulation supply in multimedia environment.
Headphones dispatching in audio video environment.
BLOCK DIAGRAM
ORDER
INPUT
Mute order
FRONT PHONES 1
BALANCED
INPUT 1
UNBALANCED
INPUT 1
UNBALANCED
INPUT 2
Allows ORDER
Over 1 to 6
REAR PHONES 1
REAR PHONES 2
Coupled
Rear input
UNBALANCED
INPUT 6
REAR PHONES 6
Coupled
Rear input
Rami
10
AMC610
