II - OPERATING LEVELS
1 - 1. LEVEL : PARAMETER SETTINGS FOR THE END-USER
The setting of the room sensor can be made to meet the individual needs of the end-user.
Buttons Explanation
Press one of the 2 line selection buttons.
- This will take you to the programming mode "End-user”. (1. level)
Display :
Line
1
2
3
4
P ROG
a) b) c)
a) Line name b) Line number c) Setting of the parameter
Press the line selection buttons to select the required line.(rep. b).
- The parameter list containing all possible settings is indicated in § 1.1 - section
IV - Parameter list
P ROG
. . .
Press the plus or minus button to enter the required value (rep. c). The setting will be stored as soon as you leave the programming mode or change to another line.
- The parameter list containing all possible settings is indicated in
§ 1.1 - section IV - Parameter list
By pressing the Info button, you leave the programming mode "End-user”.
permanent display
- 5 -
