Installation Instructions
CrossBoard®
(Cat 141C-VN50)
WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.
Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of
malfunction or damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.
Connection module 3-pole
Anschlussmodul 3-polig
Módulo de conexión 3 polos
Bornier de raccordement 3P
Piastra con morsetti di connessione, 3p
端子排 3线
UL508
IEC61439-1
Attention: To prevent electrical shock, disconnect from power source
before installing or servicing. Install in suitable enclosure. Keep free
from contaminants. To be commissioned and maintained only by
qualified personnel!
Achtung: Vor Installations- oder Servicearbeiten Stromver­­
sorgung
unterbrechen, um Unfälle zu vermeiden. Die Geräte müssen in einem
passenden Gehäuse eingebaut und gegen Verschmutzung geschützt
werden. Inbetriebsetzung und Wartung nur durch Fachpersonal!
Atención: Con el objeto de evitar accidentes, hay que desconectar
la alimentación eléctrica antes de realizar el montaje y la puesta en
marcha. Debe instalarse en una caja o armario apropiado. Debe
protegerse el producto de los ambientes agresivos. La puesta en
marcha y el mantenimiento ha de hacerlo exclusivamente por personal
especializado!
141C-VN50
Accessories
Attention: Avant le montage et la mise en service, couper l’alimentation
secteur afin d’éviter tout accident. Prévoir une mise en coffret ou
armoire appropriée, protéger le produit contre les environnements
agressifs. Mise en service en entretien: seulement par du personnel
spécialisé!
Attenzione: Per prevenire infortuni, togliere tensione prima dell’installa­
zione o manutenzione. Installare in custodia idonea. Tenere lontano
da contaminanti. Messa in servizio e manutenzione solo da personale
specializzato!
IP 20 touch protection
Tools
4
0,8x4
2
CrossBoard®
1. Mounting of 141C-VN50
1
2
Click
1.1
2. Connection of cable
3x
A = max. 11,5 mm
2
4
1
B = 12 mm
0,8x4
1
2.2
17 mm
2.1
Ø ≤ 16 mm²
1
IP 20 touch protection
L1
3x
2
L2
4
5 Nm
45 lb.in
2.3
2.4
Publication 141C-IN001A-EN-P - June 2020
DIR 10005512267 (Version 00)
2
L3
CrossBoard® 3
2
1
Click
2.5
2.6
3. Dismounting of 141C-VN50
0,8x4
0,8x4
3 mm
1
A
1
1
1
B
3 mm
3.1C
3.1AB
4. Top connection
2x
1
3
2
4.1
Publication 141C-IN001A-EN-P - June 2020
DIR 10005512267 (Version 00)
1
For Technical Support, visit ROK.AUTO/SUPPORT.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza ĺş Merkezi E Blok Kat:6 34752 ĺçerenky, ĺstanbul, Tel: +90 (216) 5698400
EEE YÖnetmeliğine Uygundur
Allen-Bradley, expanding human possibilities, FactoryTalk, and Rockwell Automation are trademarks of Rockwell Automation.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 141C-IN001A-EN-P - June 2020
Copyright ©2020 Rockwell Automation, Inc. All Rights Reserved. Printed in Germany
DIR 10005512267 (Version 00)
">
