Proline PFL105 W-F-2 Manuel du propriétaire

PDF
Document
Proline PFL105 W-F-2 Manuel du propriétaire | Fixfr
/

User questions

U P

Michael U.

How to interpret error signals and resolve common operation issues?

Errors are indicated by blinking temperature lights: 20°C indicates the door is not closed; 40°C indicates a water inlet issue (check tap, pressure, and filter); both 20°C and 40°C indicate a drainage problem (check for blockages or kinks). For vibrations, ensure transport bolts are removed and the machine is level. Ensure the drain hose is not positioned higher than one meter above the floor.

U P

Michael U.

How to interpret the flashing temperature lights on the control panel?

A flashing 20°C light indicates the door is not closed properly. A flashing 40°C light indicates a water supply issue. When both 20°C and 40°C lights flash, it indicates a drainage problem. Checks should include the faucet, water pressure, filters, and the drain pump or hose.

U P

Michael U.

What to check if the machine vibrates or makes excessive noise?

Ensure all transport bolts have been removed and verify that the machine is perfectly level on a flat surface.

U P

Michael U.

How to resolve error indicators on the washing machine control panel?

A flashing 20°C light indicates the door is not closed properly. A flashing 40°C light signifies a water supply issue; check the tap, water pressure, and filter. If both 20°C and 40°C lights flash, check the drainage hose for kinks or blockages and clean the drain pump.

U P

Michael U.

How to interpret and resolve error indicators and common issues on the washing machine?

A flashing 20°C light indicates the door is not closed properly. A flashing 40°C light indicates a water supply problem; check the faucet, water pressure, and inlet filter. If both 20°C and 40°C lights flash, there is a drainage issue; check for a blocked hose or pump. For excessive noise or vibration, ensure all transport bolts are removed and the machine is level on a flat surface.

U P

Michael U.

How to interpret the flashing temperature indicator lights on the control panel?

A flashing 20°C light indicates the door is not closed properly. A flashing 40°C light signifies a water supply issue. If both 20°C and 40°C lights flash simultaneously, there is a drainage malfunction requiring a check of the hose and pump.

A P

Patricia A.

What is the required installation height for the drain hose?

The end of the drain hose must be installed at a minimum height of 60 cm and a maximum height of 100 cm (1 meter) above the floor.

U P

Michael U.

How to interpret the flashing temperature indicator error codes?

A flashing 20°C indicator means the door is not closed. A flashing 40°C indicator signifies a water supply issue. Simultaneously flashing 20°C and 40°C indicators indicate a drainage malfunction.

U P

Michael U.

What should be checked if the machine vibrates or makes excessive noise?

Ensure that all transport bolts have been removed and that the device is level on a flat surface.

A P

Patricia A.

What are the required height specifications for the drain hose installation?

The end of the drain hose must be positioned at a minimum height of 60 cm and a maximum height of 100 cm (1 meter) above the floor.

U P

Michael U.

How to interpret the flashing temperature lights on the control panel?

A flashing 20°C light indicates the door is not closed properly. A flashing 40°C light indicates a water inlet issue. If both 20°C and 40°C lights flash, there is a drainage malfunction.

Preparing document for printing…
0%