Ryobi B-850F Manuel utilisateur

The manual states that changing the belt on the RYOBI B-850F sander is easy. Although specific technical steps are not detailed, general steps include: ensuring the device is unplugged, locating and activating the tension lever to release the abrasive belt, removing the old belt and inserting a new one of dimensions 75x534 mm, re-engaging the lever to tension the new belt, and using the micrometric adjustment mechanism to ensure precise centering during use.

To change the 75x534 mm belt, unplug the tool and use the tension lever to release the old belt. If the lever does not release the belt, check for dust buildup around the mechanism, ensure no debris is obstructing the steel wear plates, or try adjusting the micrometric tracking screw to help free the mechanism.

To change the belt, disconnect the power and use the tension lever to replace the 75x534 mm belt. If the lever does not release, clean away dust buildup, check for debris near the wear plates, or adjust the micrometric tracking to free the mechanism.