Bull Escala PL1600R Manuel utilisateur

expect ”0\r” or ”OK\r\n” timeout 2
send ”ATV0X0S0=2\r”
expect ”0\r” timeout 2
done
waitcall:
ignore ”2\r” timeout 1
expect ”2\r” timeout 10
#
#
#
#
#
#
Retrain with adaptive rate
Confirm commands successful
Numeric response code
AT compatible messages
Answer on 2nd ring
Confirm commands successful.
# Ignore first ring.
# Pick up second ring
# or timeout.
# Expect a connection response.
expect ”1\r” timeout 60
done
page:
send ”ATD%N,%R\r”
expect ”0\r” or ”3\r” timeout 30
delay 2
send ”+++”
delay 2
send ”ATH0\r”
expect ”0\r” timeout 2
done
ripo:
send ”AT&F*E0E0\r”
ignore ”0\r” or ”OK\r\n” timeout 2
send ”AT#F0*Q2\r”
expect ”0\r” or ”OK\r\n” timeout 2
send ”ATV0X0S0=0\r”
expect ”0\r” timeout 2
done
error:
#
#
#
#
#
#
#
#
#
#
%N = pager call center number
commas=6sec wait time to
enter paging number.
%R = return number
Confirm successful command.
Wait before hanging up.
Assure command mode.
Allow mode switching delay.
Hang up.
Confirm successful command.
#
#
#
#
#
#
#
#
#
#
#
#
Reset to factory defaults.
*E0=data compression disabled
E0=echo disabled
Ignore modem response.
Trellis modulation disabled
Retrain with adaptive rate
Confirm successful command.
Numeric response code
AT compatible messages
Auto–Answer disabled
Confirm commands successful.
# Handle unexpected modem
# responses.
expect ”8\r” or ”7\r” or ”4\r” or ”3\r”
delay 2
done
Configurations des modems
B-11
">