EG_WS0008_CL_020_FR
2.12 Configurations & informations courantes
2.12.1 AT+LOCCNF – Configuration générale
Description:
Cette commande permet de visualiser la configuration du matériel.
Syntaxe:
AT+LOCCNF
(CoNFig)
Exemples :
Commande Réponses Possibles
AT+LOCCNF CONFIGURATION
Local identify ........................ 358730000000265
GSM Registered parameters ............. Not Registered
Page 32 / 70
SIM Card presence ..................... Removed
SIM Code Status ....................... Unknown
GPS position capture .................. STOPPED
GPS power supply management ........... Always powered
GPS antenna parameters ................ Powered, Connected, 3217 mV
Interval between capture .............. 00:00:10
HDOP max value ........................ 10
FIX min value ......................... 1
SPEED min value ....................... 0 km/h (0.000000 knots)
NB SAT min value ...................... 04
Frame output format ................... NMEA RMC
Transmit position ..................... STOPPED
Transmit method ....................... Interval
Interval delay ........................ 00:10
Number of remote phone numbers ........ 00
Hour correction parameter ............. +00
GPI status ............................ I0:1 I1:1 I2:1
GPO status ............................ O0:Opened
OAT V3.03.Q2406B-GENLOC31e version V1.42 - Jul 25 2006 13:15:03
OK
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
