Template For SAM Series — Magnet Body
e out [his Area For, Lock To Be 1/18" - 5.425 [137.80mm] на
ote. De or Mounting Is 10 be 4 x Lock Mount Bracket Holes: - -
[1.59mm] Deep (Both Ends). 9/64" [3.6mm] Dia. x 1/2” [12.70mm] - 23-128 ВАА]
| Deep For Wood Screws 5 [ 92mm]
dE _ — | .750
Cut Out This Area For + 1 [19.05mm]
.900 |} tock Mounting Clearance. —________ _ _ _5€Mget _— LL |
[22.86mm] 450 Note: Depth For Mounting Is To Be = 1.500
| [11.43mm] 1-1/8" P28 58mm] Deep Minimum. a [38.10mm]
(1 _ _ ©
| NY N |
RAN KR
= 9.600 [243.84mm] IA сне! С -
- 10.250 [260.35mm] - (8 Places) *
- 10.850 [275.59mm] -
SOLID WOOD TYPE FRAME
Flush Mount Brackets Not Used
SN Flan Mount Brackel Ho - 6.150 [156.21mm] -
x Flush Mount Bracket Holes: _ _
13/64” [5.2mm] Dia., Countersink 82° To 3/8" [9.5mm] 5.775 [146.69mm]
(Major) Dia. For Flat Head Machine Screws = 5.425 [137.80mm] -
( NN {
E) — — ©) 750
= [19.05mm]
900 > E Magnet
[22.86mm] DE. > —— AM zz DO
| 450 = 1.500
[11.43mm] 7 _ © _ O [38.10mm]
| Ny NS |
a TP
- 10.850 [275.59mm] = DL Chisel Corners
À
11.550 [293.37mm]
12.300 [312.42mm]
HOLLOW METAL AND ALUMINUM / STEEL TYPE FRAMES
Flush Mount Brackets Used
Square (4 Places)
P/N 500-20100—G
DO NOT PHOTOCOPY TEMPLATE (dimensions will change)
(Sheet 1 of 3)
—JECURITRON
ASSA ABLOY
Template For SAM Series — Strike Assembly
= == == = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = — = — — — — — - Strike Top Assembly View — For:
77 ST
O 5 a ©
| a Do |
| \ - 7 ___0|_ 27 |
A ос
_ I _ E E Strike
| > a --- |
| \ ‘ A >, >, \ ( / ( р р | © |
| NE No e |
LL J
Reference Only!
Cut Out This Area
5 x Base Mount Bracket Holes:
For
Strike Idle Plate Mounting.
Note: Depth For Mounting Is To
Deep For Wood Screws 2 y Clearance Holes:
5/16" ]
Be 1” [25.40mm] Deep Minimum. —T X 16,
9/64" [3.6mm] Dia x 1/2" [12.70mm]
[7. 9mm| Dia.
E Strike
|
[6.35mm] Deep
- 2.750 [69.85mm]
- 2.500 [63.50mm]
— 1.750 [44.45mm]—
4.500 [114.30mm]
Ÿ
| |
| |
| |
| |
| |
| |
| |
| |
5 IE
| |
— — — 1y .725
| © [18.42mm] |
| ‚800 | e + _ A € Strike In | | 1.450 |
| [20.32 тт] A | Nu [36.83mm] |
| | Y m |
© - - ®-
| 400 N A |
| . | |
| [10.16mm] - 3.500 [88.90mm] - !
| _ 5.000 [127.00 _ Chisel Corners Square |
| - . [127.00mm] - (4 Places) |
' - 5.500 [139.70mm] -
- 9.000 [228.60mm] -
HARD CORE WOOD TYPE DOOR
| End Mounting Brackets Not Used |
р]
о ато оо и 428 [137 80mm -
| | 4 x End Bracket Mount Holes: - | |
| 13.18mm] Deep (Both Ends). 9/64” [3.6mm] Dia. - 5.125 [130.18mm] | | |
| | X 1/2” [1 2, 70mm] Deep == 4.800 [1 21 92mm] To | |
| Zz ÓN | | À |
| AE — — HS — .725 |
| Cut Out This Area For [18.42mm] |
| . ‘ D |
| 900 | Strike Mounting Clearance. _ _ _ = GC Strike _ _ _ _ | 1.450 |
| [22.86mm] 450 Note: Depth For Mounting Is To Be > L36.83mm |
| [11.43mm] A 1-13/32” [35.72mm] Deep Minimum. о! x |
| | BRS a ) i |
| \_ |
| с” € |
| |
| - 9.600 [243.84mm] - HR hice Corners Square |
| - 10.250 [260.35mm] - (8 Places) |
| - 10.850 [275.59mm] - |
| SOFT CORE TYPE WOOD DOOR
| End Mounting Brackets Used |
P/N 500—20100—G DO NOT PHOTOCOPY TEMPLATE (dimensions will change) (Sheet 2 of 3) JECURITRON
ASSA ABLOY
Template For SAM Series — Strike Assembly
NA — — NT
oo S a o
| au NU |
| a - --®|---- VL} |
| TEN À Strike |
wot" - Le HE 00e (@ - — - —-
| 7 IX e TIN |
| O CUE © |
| LA NI _ |
LN J |
6
13/64” [5.2mm] Dia., Countersink 82° To 3/8" [9.5mm]
Xx Flush Mount Bracket Holes:
6.150 [156.21mm]
OPEN CHANNEL ALUMINUM AND TOP RAIL CHANNEL (HERCULITE) TYPE DOOR
Flush Mount Brackets Not Used
|
|
(Major) Dia. Through Frame Material Thickness - 5.775 [146.69mm] - |
For Flat Head Machine Screws - 5.425 [137.80mm] - |
Y a NN 7 | Ä
a @ |
+ — — D ‚750
u С |
300 ND © N [19.05mm] |
x |
20 LO) -1— -— o ae 75S
| ‚450 >) 1.500 |
[11.43mm] Za _ _ (© [38.10mm]
| NZ N |.
\_ A |
> |
— 10.850 [275.52mm] — > > File Corners |
= 11.550 [293.37mm] - Square |
- 12.300 [312.42mm] — (4 Places) |
FLUSH TOP HOLLOW METAL AND ALUMINUM TYPE DOOR |
Flush Mount Brackets Used |
AEB Mentes NR ana aa
9/64" [3.3mm] Dia. Holes Through Frame Material. _ _
For: Sheet Metal Screw Mounting Or Tapping 5.125 [130.18mm] |
8—32 UNC [M4 x .07] Machine Screw Mounting - 4.800 [121.92mm] |
> 7 < |
\ Г |
т Note: If Mounting In Top Rail Channels; _ D— |
Do Not Drill and Tap Through Channel | ; .725 |
Cut Out Area For: 1/8” [3.18mm] [18.42mm] |
or Shoe Material Into Glass Door. D y, . »
‚900 | =| sti To 1-3/8" [34.93mm] Deep Channels 1-1/2
[22.86mm] - B= Strike 0 oC TT 26 а | [38.10mm]
450 Cut Out Area Not Needed For: 1—1/2” [ 56. mm] Minimum
| [11.43mm] © [38.10mm] To 2” [50.80mm] Deep Channels |
® - - p—
) | N |
|
= ( |
- 9.600 [243.84mm] SN File Corners |
- - Square
10.250 [260.35mm] (4 Places)
|
|
|
P/N 500—20100—G
DO NOT PHOTOCOPY TEMPLATE (dimensions will change)
(Sheet 3 of 3)
—JECURITRON
ASSA ABLOY
">
