COPLAN Champion Manuel utilisateur

PDF
Document
Guide d'utilisation Champion + Chat IA et PDF | Fixfr
/

User questions

Y C

James Y.

How to troubleshoot a juicer that will not start or stops during operation?

Ensure the chute is pushed firmly to the back to engage the magnetic safety system. If the motor is overloaded, clean any accumulated pulp from the interior body and the cutter. Verify that the electrical outlet provides sufficient voltage and is not overloaded by other devices. If a dark liquid appears under the front plastic hub, the seal is damaged and must be replaced to protect the motor.

Y C

James Y.

What operational requirements must be met for the juicer's magnetic safety system to allow the motor to start?

The chute must be pushed firmly into the housing to engage the magnetic safety switch. Additionally, the motor may not start if it is overloaded with accumulated pulp or if the electrical outlet has insufficient voltage due to other high-power appliances being connected to the same circuit.

Y C

James Y.

What should be checked if the juicer does not start or stops during use?

Ensure the chute is fully engaged to activate the magnetic safety system. Clear any pulp buildup if the motor stops due to overload. Verify that the power supply is stable. If a dark liquid appears under the front hub, the seal may be damaged and requires inspection.

Y C

James Y.

What safety conditions prevent the motor from starting or cause it to stop during use?

The motor will not start if the chute is not firmly positioned to engage the magnetic safety sensor on the extractor body. Additionally, the motor may stop if the internal body or cutter is overloaded with accumulated pulp, requiring cleaning before restart.

Y C

James Y.

What to check if the extractor fails to start or stops during operation?

Ensure the chute is pushed firmly to the bottom to engage the magnetic safety switch. Clear any pulp accumulation inside the machine and ensure the electrical outlet provides stable voltage.

Y C

James Y.

What should be checked if the extractor does not start?

Ensure the magnetic safety system is engaged by pushing the chute firmly into the body. Check for pulp overload and clean the interior if necessary. Also, verify that the electrical outlet provides sufficient voltage.

Y C

James Y.

How to troubleshoot a juicer that will not start?

Ensure the chute is pushed firmly to engage the magnetic safety starter. Clean any pulp buildup from the body and blade if the motor is overloaded. Check the power outlet's voltage to ensure it is sufficient. If a dark liquid appears under the front plastic hub, the seal requires replacement.

Preparing document for printing…
0%