Techwood TVE-439 Ventilateur sur Pied Manuel utilisateur

PDF
Document
Techwood TVE-433, TVE-439 Manuel d'Utilisation | AI Chat | Fixfr
/

User questions

T E

John T.

How to assemble the fan (models TVE-433 / TVE-439)?

  1. Cross the base legs and screw them to the bottom tube. 2. Extend the upper tube to the desired height and tighten the ring. 3. Secure the motor block onto the upper tube. 4. Attach the rear grille, install the fan blades (tighten the central nut counter-clockwise), and secure the front grille with the safety screw.
T E

John T.

What are the procedures for assembling and installing the TVE-433 or TVE-439 fan?

  1. Base: Cross the legs and screw them to the lower tube with 4 screws. 2. Height: Pull the upper tube out and tighten the ring at the desired height. 3. Motor: Secure the motor block onto the upper tube with the locking screw. 4. Grilles and Blades: Fit the rear grille, attach the blades (tighten counter-clockwise), then attach the front grille using the clips and safety screw.
T E

John T.

How to assemble and install the fan (models TVE-433 / TVE-439)?

  1. Assemble the base by crossing the legs and securing them to the lower tube with four screws. 2. Adjust the height by pulling the upper tube and tightening the locking ring. 3. Secure the motor block onto the upper tube. 4. Install the rear grille, then the fan blades (tightening the central nut counter-clockwise), and finally the front grille. 5. Lock the clips and tighten the bottom safety screw.
T E

John T.

How to assemble and install the TVE-433 / TVE-439 fan?

  1. Assemble the base by crossing the legs and fixing them to the bottom tube. 2. Adjust the height of the upper tube and tighten the ring. 3. Secure the motor to the upper tube. 4. Attach the rear grille, mount the blades (securing the nut counter-clockwise), and fix the front grille with safety clips and the bottom screw.
T E

John T.

How to assemble the TVE-433 or TVE-439 fan?

  1. Base Assembly: Cross the legs and screw them into the base tube. 2. Height Adjustment: Pull the upper tube to the desired height and tighten the ring. 3. Motor Installation: Secure the motor unit onto the upper tube with the locking screw. 4. Grilles and Blades: Install the rear grille, attach the blades (tightening counter-clockwise), and secure the front grille with the safety screw.
Preparing document for printing…
0%