7-Day TIME SWITCH
MULTI-VOLTAGE WI-FI TIMER
120/208 – 240/277VAC
WFTU40
DESCRIPTION
•
•
•
FEATURES
•
•
•
•
•
•
•
Commercial grade
Indoor/outdoor plastic case
UL tested per UL/CSA
Dual voltage ready
DPST Contacts
ON/OFF controls
ON/OFF override
Wi-Fi app ready
Surge protected
Two year warranty
iOS
E5877
469D
WFTU40
TYPE
Add
Hologram
90059-481
VOLTAGE
60Hz
UNIVERSAL MULTI-VOLTAGE 120-277VAC
Resistive
WI-FI TIME SWITCH
28VDC
E5877
SPECIFICATIONS
469D
Add
120-277VAC
Hologram
Input Voltage: 120, 208-240,
277 VACInductive
60 Hz, 6VA Max @ 120VAC
90059-481
Output: DPDT, Dry Contact
(Unpowered)
CONTACT RATINGS
120VAC
RATINGS
WFTU40
Android
NO
NC
40A
30A
20A
-
30A
15A
30A
10A
MIN
UNI
SPECI
Tension
Sortie :
CAPAC
Ballast
UNIVERSAL MULTI-VOLTAGE
NO CONTACTS:
WI-FI TIME SWITCH
40 AMPS RESISTIVE @ 120-277 VAC 60Hz
20A
NC 277VAC
CONTACTS:
MINUTERIE
10A
CON
WI-FI À TENSION
40 A RÉ
30 AMPS RESISTIVE @ 120-277 VAC
60Hz
UNIVERSELLE
120VAC
15A
30 A IN
30 AMPS INDUCTIVE @ 120-277 VACTungsten 15 AMPS INDUCTIVE
@ 120-277 VAC
SPECIFICATIONS
SPECIFICATIONS
1 HP, IN
1/4 HP, 12 FLA, 30 LRA @ 120 VAC
2 HP, IN
1/2 HP, 12 FLA, 33 LRA @ 250 VAC
720 VA
BALLAST
10 AMPS BALLAST120VAC
@ 120-277 VAC
à 12
290 VA, PILOT DUTY @ 120 VACTension d’entrée : 120, 208-240, 277 V c.a. 60 Hz, 6VA maxBALLAST
360 VA, PILOT DUTY @ 240 VACSortie : Contacts secs (ne sont pas sous tension), bipolaires et15bidir
A TU
125VAC
290 VA
Pilot Duty
20 AMPS RESISTIVE @ 28 VDC
20 A RÉ
720 VA, PILOT DUTY @ 120-240 VAC
720 VA
30 AMPS MAX ABOVE 104˚F
30 A MA
240VAC
720 VA NORMALEMENT
360OUVERTS
VA
NC CONTACTS:
NO CONTACTS:
CONTACTS
: CONTACTS NO
Operating
Temperature
:
-31°F
to
116°F
(-35°C
to
+47°C)
Relative
Humidity
10%
to
95%
40
A
RÉSISTIF
À
120-277
V
c.a.
60Hz
40 AMPS RESISTIVE @ 120-277 VAC 60Hz
TEMPÉRAT
30 AMPS RESISTIVE @ 120-277 VAC 60Hz
30 A RÉSISTIF
À 120-27
30 A INDUCTIF
120-277 V c.a. 1/4HP 12FLA 30LRA
120VAC
1HP
30FLAÀ 90LRA
30 AMPS INDUCTIVE @ 120-277 VAC
15 AMPS INDUCTIVE @ 120-277 VAC
15 A INDUCTIF À 120-2
1 HP, INTENSITÉ MAXIMALE DE 30, 90 LRA À 120 V c.a.
1 HP, 30 FLA, 90 LRA @ 120 VAC
1/4 HP, 12 FLA, 30 LRA @ 120 VAC
1/4
HP,
INTENSITÉ
MAX
2
HP,
INTENSITÉ
MAXIMALE
DE
20,
60
LRA
À
240
V
c.a.
2 HP, 20 FLA, 60 LRA @ 240 VAC
1/2 HP, 12 FLA, 33 LRA @ 250 VAC
MotorTO COMPLY WITH ALL LOCAL240VAC
2HP
BALLAST20FLA
DE 30 A60LRA
À 120 V c.a.
1/2 HP, INTENSITÉ MAX
30 AMPS BALLAST @ 120 VAC
10 AMPS BALLAST
120-277
Use copper@wire
AWG 8-18VAC
suitable for 90°C. WIRING
AND NATIONAL ELECTRICAL
CODES.
Utilisez
d
Cancer and reproductive
harm.
20 AMPS BALLASTWARNING:
@ 277 VAC
BALLAST
DE 20 A À 277 V c.a.
290 VA, PILOT
DUTY
@ 120
VAC
BALLAST DE 10 A À 120
Bonding
between
conduit
connection is not automatic and must be provided as part of the installation. THE
ENCLOSURE
NATIONA
15 AMPS TUNGSTEN
@ 120 VAC
360 VA, PILOT DUTY @ 240 VAC
15 A TUNGSTÈNE À 120 V c.a.
www.P65Warnings.ca.gov.
290 VA RÉGIME
DE FON
MUST BE PROPERLY GROUNDED. Minimum 10.6 lb. in. torque required at the terminals
to ensure proper20connections.
250VAC
1/2HP
12FLA
33LRA
20 AMPS RESISTIVE @ 28 VDC
raccords
A RÉSISTIF À 28 V.C.C.
360 VA RÉGIME
DE FONd
720 VA, PILOT DUTY @ 120-240 VAC
Strip the supply and load wires to 1/2".
720 VA RÉGIME DE FONCTIONNEMENT ASSERVI À 120-240 V c.a.
TERRE DE
30 AMPS MAX ABOVE 104˚F
30 A MAX. AU-DESSUS DE 40 °C
assurer u
1 HP, 30 FLA, 90 LRA @ 120 VAC
2 HP, 20 FLA, 60 LRA @ 240 VAC
AMPS BALLAST @ 120 VAC
Input Voltage: 120, 208-240, 277 VAC 60 Hz, 6VA Max @ 30
120VAC
20 AMPS BALLAST @ 277 VAC
Output: DPDT, Dry Contact (Unpowered)
15 AMPS TUNGSTEN @ 120 VAC
CONTACT RATINGS
CAPACITÉ DES CONTACTS :
WIRING INSTRUCTIONS & DIAGRAM
Typical
Wiring
Diagram,
Application
Typical
Wiring
Diagram,
120120/277VAC
VAC Application
Operating Temperature : -31°F to 116°F (-35°C to +47°C) Relative Humidity 10% to 95%
TIMER
SUPPLY
WIRING INSTRUCTIONS & DIAGRAM
NC ELECTRICAL
NO C CODES.NC NO C
Use copper wire AWG 8-18 suitable for 90°C. WIRING TO COMPLY WITH ALL LOCALH ANDNNATIONAL
Bonding between conduit connection is not automatic and must be provided as part of the installation.LOAD
THE ENCLOSURE LOAD
MUST BE PROPERLY GROUNDED. Minimum 10.6 lb. in. torque required at the terminals to ensure proper connections.
Strip the supply and load wires to 1/2".
L N
N L
N L
Typical
Wiring
Diagram,
Application
Typical
Wiring
Diagram,
120120/277VAC
VAC Application
N
NC
NO
C
NC
LOAD
L
N
H
N
N
NO
C
L2
Utilisez des fils en cuivre de calibre AWG 8-18 pouvant résister à une température
NATIONAL DE L’ÉLECTRICITÉ ET TOUS LES CODES LOCAUX QUI PORTENT SUR LE CÂB
raccords de conduit n’est pas automatique et doit être comprise avec l’installation. L
TERRE DE FAÇON APPROPRIÉE. Un couple d’au moins 1,22 kilogramme-force/mètr
Scan with a mobile
device
assurer
une connexion appropriée. Dénudez de 1,27 cm les fils d’alimentation et d
for additional information.
H
L
N
Schéma de câblage classique, utilisation de 120/
TIMER
SUPPLY
NC
N
NO
C
NC
NO
C
H
N
NC
LOAD
L
L1
L2
L1
Scan with a mobile device
for additional information.
NO
C
CHARGE
LOAD
L2
L
N
N
NC
CH
L
L
! CAUTION !
Schéma de câblage classique, utilisation de 208/2
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
RISK OF
SHOCK
interference, and (2) this device must accept any interference received, including interference
thatELECTRIC
may cause
undesired operation of the device.
Alimentation
TIMER
la minuterie
thanparty
one disconnect
switch
be requiredcould
to de-energize
equipment
FCC Caution: Any changes or modifications not expressly approvedMore
by the
responsible
formay
compliance
void thethe
user’s
authority to operate this equipment. deSUPPLY
NC
NO
C
NC
NO
L1
before servicing. Disconnect power at main panel prior to installing or servicing
this lighting control or the equipment connected to it.
C
DATA SHEET ©2021 NSI LOAD
Industries, Inc.
L1
L'INSTALLATION ET Schéma de câblage
Alimentation
de la minuterie
LOAD
Typical Wiring Diagram, 208-240 VAC Application
TIMER
SUPPLY
TEMPÉRATURE DE FONCTIONNEMENT : -35 °C à 47 °C (-31 °F à 116 °F) et lorsque l
TIMER
SUPPLY
TIMER
SUPPLY
H
Typical Wiring Diagram, 208-240 VAC Application
L'INST
L2
MADE IN CHINA
100599-212
H
N
NC
NO
NSI Industries | 800.321.5847 | www.nsiindustries.com
REPLACE INSULATOR AFTER WIRING.
C
NC
LI-1121(A
WFTU40
CHARGE
LOAD
FABRIQUÉ
">
