Synology DS215J Manuel utilisateur

PDF
Document
Synology DS215J Manuel utilisateur | Fixfr
/

User questions

U M

Patricia U.

How to troubleshoot a Synology DS215j that is not starting or detected?

If the DiskStation is not starting or is not detected, check the following points:

  1. Power: Ensure the power cord is correctly plugged into a stable power outlet. Verify that the power button is activated.
  2. Network Connection: Check that the network cable is properly connected between the DiskStation and the router or switch. The computer used for detection must be on the same local network.
  3. Indicator Status: Consult the relevant section of the document to interpret the indicator lights. A power indicator off or a disk indicator off may indicate a hardware problem or missing disks.
  4. Installation: If the device is new, ensure that the SATA hard drives are correctly inserted and connected to the internal SATA ports.
Preparing document for printing…
0%