12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com 800-626-1126 5PSP SOFT-CLOSE CHROME BLIND CORNER ORGANIZER TOOLS REQUIRED: 1 1 8 4 5PSP-15 Item No. 11 11 4 4 #2 CHECK LIST 88 #2 PANELS Item No. 5PSP-15 Description 1 A Base 3 1 7 16 32 B CHECK Frame PANELS LIST 64 1 31 #2 #2 Foot C 16 Description QTY 811 33 77 Guide channel D 1 32 32 64 64 1 A Base Basket 45 MIN 3 M6x10mm 88 wafer head screw 8 16 16 FITTINGS CHECK LIST 3 4 M5x6mm flat-headed screw 8 B Description QTY 5 5/32 x18mm wood screw 19 5 5/32 x18mm wood screw 19 INSTALLATION OPTIONS 2” 2” 2” 5PSPSC-15 (15” Opening) page 2 left handed door 1” (Left) 5PSPSC-18 (18” Opening) page 6 left handed door 5PSPSC-18 (18” Opening) page 8 right handed door 2. 12” (305mm) Visit our 3 20141120-B01 5 A 16 4 D 5 8 C 5 41 2 E 1 (Left) 5 D (Left) PANEL PARTS LIST: FITTING PARTS LIST: 90˚ 5PSPSC-15 (15” Opening) page 4 right handed 1” 1” door B Description 2” 1 90˚ 90˚ Description QTY Base 1 Frame 1 Foot 1 D Guide channel 1 E Basket 4 or 6 QTY 1” Handle 1. 2 M4x10mm flat-headed screw 2 3 M6x10mm wafer head screw 8 4 M5x6mm flat-headed screw 8 5 5/32 x18mm wood screw 2 A90˚ 2 B C 12” (305mm) B 19 3. 12” (305mm) 1 YouTube Channel for an installation video of this product Youtube.com/REVASHELF 2 I-5PSPSC-TRI-1115 10” (256mm) 2 2 8 8 7 64 A 3-TIER B 7-1/4 ” (184mm) 1 Handle 1 MAINTENANCE: 2 CARE AND 3 screw 2 M4x10mm flat-headed A 8 screw Clean with3a damp cloth 11 M6x10mm waferand head wipe parts dry. 22 4 M5x6mm flat-headed screw 3 32 C for full height application 10” (256mm) #1 #1 2-TIER 4 1 B Frame FITTINGS CHECK LIST Foot 1 C 5 2 Description QTY 5 ASSEMBLY TIME: #1 ESTIMATED16 8 D Guide 1channel 1 2 Handle #2 #1 M4x10mm flat-headed screw Basket 4 2 2 E 55 55 5PSP3-XXSC-CR for a door drawer application 7-1/4 ” (184mm) E 2 1 8 5PSP-XXSC-CR 1 10” (256mm) 33 88 QTY 7-1/4 ” (184mm) #2 3 #2 8 1 4 Full Height Blind Right Full Height Blind Right A Blind Portion Blind Portion of Cabinet of Cabinet 8 19 5 Door Opening Full Height Blind Left Shown with adjacent cabinet 2 3 B Door Opening (Left) Full Height Blind Left Shown with adjacent cabinet E Blind Portion of Cabinet 5PSP-15 (LEFT HANDED DOOR/15” OPENING) Door Opening Door Opening Door Opening Door Opening Door Opening D Mount Base (Fig A) 2. Note: If installing into a face frame cabinet, Slide Base A must be flush with the face (Left) frame opening. 2 7-1/4 ” (184mm) No. 5PSP-15 QTY 1 Faceframe 12” (305mm) 1 12” (305mm) 1 Base CK LIST 1 Frame n QTY 1 Foot 1 2 1 Guide channel STEP 2 1 1 Basket Attach the base 4 (A) with slide 1 2 channel (d) to floor3of cabinet TINGS CHECK A el 1 (Fig B)LIST Description B QTY 4 2 Handle NOTE: Pre-starting the CK LIST mounting 3 screws (4) 4 is M4x10mm flat-headed screw 2 n QTYrecommended M6x10mm wafer head screw 8 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 d screw 8 screw 8 5 screw 19 B 4 C 20141120-B01 E D E 5 D D 3. D 4 (Left) 1. D Optional Rear Handle Position 5. m No. 5PSP-15 1. A 5 1. (Left) B 1 Base Attach Handles. 1 Frame K LIST 2-TIER (FIG C) Foot 2 12” (305mm) QTY 1 41 Guide channel 1 1 3-TIER (FIG D) Basket 4 1 FITTINGS LIST 1 CHECK 2 Description QTY l 1 2 4 1 Handle 2 M4x10mm flat-headed screw 2 2K LIST 3 3 M6x10mm wafer head QTY 3. screw 8 3 A 4 E 2 7-1/4 ” (184mm) 1 10” (256mm) Fig C) STEP 3 C Fig C B) 3. (Left) PANELS CHECK LIST QTY 15 Description 2 4. To front of cabinet B From Door Opening A 3 B 4 B 12” (305mm) 1 A 10” (256mm) ANELS CHECK LIST -15 Description BLIND 1. 10” (256mm) 5 1. (Left) Fig A) STEP 1 B 12” (305mm) Forward Handle Position Fig D) 2 7-1/4 ” (184mm) 4 7-1/4 ” (184mm) K LIST QTY 2 crew 2 crew 8 crew 8 crew 19 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening 10” (256mm) 5 Door Opening 7-1/4 ” (184mm) l 1 1 1 1 4 1 10” (256mm) 4 QTY C 2 C 2 A 1 3-Tier Handle Position D 800-626-1126 | rev-a-shelf.com 5. 1/2 E 12” (305mm) 2. 5 1 2. 2. STEP 4 Adjust front wheel position for left hand opening. (Fig E) 2 Attach feet (C) using A screw (3) (Fig F) 3 Fig 14” (357mm) E 2 D 1 F) D 4 3 3 5 C BLIND 4. 1 BDOOR 3. (Left) 2 STEP 5 A Fig G) 1. 4. 7-1/4 ” (184mm) 4 4 4. 5 5. 12” (305mm) D 4 2 5. 4 1 A 4. 1. (Left) 5. STEP 6 Fig H) Hang the baskets as shown. (Fig H) NOTE: Baskets show in forward position. They can be moved to the rearward position for additional clearance. Bottom basket must hang from 4 the 2nd wire from the top. E 5 10” (256mm) D 5. 3. 10” (256mm) crew crew rew rew 19 3 3. 3. B 3 Secure the feet (C) K LIST to3the base (A) using screw (4) QTY (Fig G) 2 2 8 8 CB E 4 7-1/4 ” (184mm) 1 1 1 1 4 1. (Left) 7-1/4” (184mm) 10” (256mm) 1 1 1 1 4 K LIST QTY 2 crew 2 5 8 crew rew 8 K rewLIST 19 QTY l 3. Fig E) K LIST QTY l 2. 2 1 12” (305mm) 5 D 1/2 4 4 3 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening Door Opening Full Height Blind Left Blind Portion Blind Portion of Cabinet of Cabinet Foot 1 Guide channelDoor Opening 1 Basket 4 (Right) C 1 2 B 5PSP-15 (RIGHT HANDED DOOR/15” OPENING) A Door Opening E Door Opening FITTINGS CHECK LIST 3 STEP 1 Description QTY 1 2 3 4 5 (Right) Fig A) 2 Handle Mount Base (Fig A) 4 M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 Note: If installing into a face M5x6mm flat-headed screw 8 5 frame cabinet, Slide Base A 5/32 x18mm wood screw 19 1. D 2. BLIND must be flush with the face frame opening. Faceframe 7-1/4” (184mm) 10” (256mm) (Right) 1. 3 B 2 4. 2 To front of cabinet 12” (305mm)1 12” (305mm) From Door Opening No. 5PSP-15 20141120-B01 C 1 B C 1 Base CK LIST 2. 1B Frame n QTY 1 Foot 1 2 1 STEP 2 Guide channel 1 1 Basket Attach the base 4 (A) with slide 1 channel 2 (d) to floor of cabinet. TINGS CHECK 3 A el 1 (Fig B)LIST Description QTY 4 NOTE: Pre-starting the 2 Handle CK LIST mounting screws (4) is 3 4 M4x10mm flat-headed screw 2 recommended n QTY M6x10mm wafer head screw 8 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 d screw 8 screw 8 5 (Left) screw 19 B Fig B) A E 3 D 4 FITTINGS LIST 1 CHECK 2 Description QTY l 1 2 4 4 Handle M4x10mm flat-headed screw K LIST 3 3. 2 3 Optional Rear Handle 5. Position (Left) 1. B Fig D) 3 1. (Left) C B 1 A B Forward Handle Position 12” (305mm) 800-626-1126 | rev-a-shelf.com 12” (305mm) 5. C 10” (256mm) E 2 A 4 4 1. 10” (256mm) 1 Base Attach Handles. Frame 12” (305mm)1 K LIST 2-TIER (FIG C) Foot 1 2 QTY 1 Guide channel 1 1 3-TIER (FIG D) Basket 4 1 D A 7-1/4 ” (184mm) STEP 3 1 E D D Fig C) PANELS CHECK LIST QTY 5 Description 5 3. 4. m No. 5PSP-15 C 3. A 2 2 7-1/4 ” (184mm) QTY 10” (256mm) Description 4 7-1/4 ” (184mm) ANELS CHECK LIST -15 5 Full Height Blind Left Shown with adjacent cabinet 7-1/4” (184mm) 10” (256mm) C D E 8 19 7-1/4” (184mm) 10” (256mm) 4 screwItem No. 2 5PSP-15 screw PANELS 8 CHECK LIST QTY screw 8Description 5 1 A Base 1 Frame screw B 19 2 3-Tier Handle Position D 2/21 E 5 .3 STEP 4 Adjust front wheel position for right hand opening. (Fig E) 2 Attach feet (C) using A screw (3) (Fig F) K LIST 5 3 QTY 2 4 crew 2 crew 8 rew 8 5 rew 19 2 3 Fig F) D 3 4. BLIND 3. 1 4. (Left) C 1. 5. B 5 D A E 10” (256mm) STEP 5 5. DOOR Fig G) 2 3 Secure the feet (C) 3 7-1/4 ” (184mm) to3the base (A) using screw (4) K LIST QTY (Fig G) 2 .5 4 crew 2 crew 8 rew 8 5 rew 19 2 D4 .4 A 12” (305mm) .4 4 1 4 5. 1. Fig H) (Left) STEP 6 3. Hang the baskets as shown. (Fig H) NOTE: Baskets show in forward position. They can be moved to the rearward position for additional clearance. Bottom basket must hang from the 2nd wire from the top. E 10” (256mm) l E 1 D 4 1 1 1 1 4 3 12” (305mm) 5 K LIST QTY .2 3. B 4 7-1/4 ” (184mm) 1 1 1 1 4 1 B C 2. 7-1/4” (184mm) 10” (256mm) K LIST QTY 3. Fig E) 1. (Right) 5 l .2 2. 5 12” (305mm) D 2 1 4 4 5 2/2 1 Door Opening Door Opening A Full Height Blind Right 4 Full Height Blind Right Full Height Blind Left Shown with adjacent cabinet 5 Blind Portion Blind Portion of Cabinet of Cabinet 5 Full Height Blind Left (Left) Shown with adjacent cabinet 5PSP-18 (LEFT HANDED DOOR/18” OPENING) D Door Opening Door Opening STEP 1 Door Opening 1. Fig A) (Left) Mount Base (Fig A) 1. (Left) Note: If installing into a face frame cabinet, Slide Base A must be flush with the face frame opening. 2. 7-1/4” (184mm) 10” (256mm) BLIND 2 Faceframe 2 4. 1 To front of cabinet 14” (357mm) No. 5PSP-15 B 3 1 14” (357mm) From Door Opening ANELS CHECK LIST -15 QTY 1 1 Base CK LIST 1 nFrameQTY 1 Foot 1B 2 1 STEP 2 Guide channel 1 1 Basket Attach the base 4 (A) with slide 1 channel 2 (d) to floor of cabinet. TINGS CHECK 3 A el 1 (Fig B)LIST Description QTY 4 NOTE: Pre-starting the 2 Handle screws (4) is CK LIST mounting 3 4 M4x10mm flat-headed screw 2 recommended n QTY M6x10mm wafer head screw 8 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 d screw 8 screw 8 5 screw 19 B Fig B) 3. C E 3. E D D 4 2 2 8 A 4 5 DA 1. 1. (Left) Optional Rear Handle Position B Fig C) (Left) 3 C D 5. 1. 10” (256mm) Fig D) 4 2 7-1/4 ” (184mm) Base Attach Handles.1 1 Frame K LIST 2-TIER (FIG C) Foot 2 QTY 1 12” (305mm)1 Guide 1 1 channel 3-TIER 4 (FIG D) Basket 4 1 4 Handle M4x10mm screw K LIST 6flat-headed 3 M6x10mm screw QTYwafer head 3. 5 D m No. 5PSP-15 PANELS CHECK LIST QTY3 1 5 Description STEP 4 B A (Left) FITTINGS LIST 1 CHECK 2 Description QTY l 1 C 20141120-B01 E B 10” (256mm) Description 4 Blind Portion of Cabinet Door Opening Door Opening 5 E Door Opening D M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 M5x6mm flat-headed screw 8 5/32 x18mm wood screw 19 1 A B Forward Handle Position 12” (305mm) 5.12” (305mm) C 10” (256mm) 3 Door Opening 2 3 4 5 C 7-1/4 ” (184mm) 19 4 7-1/4” (184mm) 10” (256mm) QTY 192 2 8 8 2 7-1/4 ” (184mm) 21 1 21 84 IST 8 A 2 2 2 3-Tier Handle 1 Position D 800-626-1126 | rev-a-shelf.com 1/2 E 12” (305mm) 2. 2. 5 2. 2. STEP 4 Adjust front wheel position for left hand opening. (Fig E) 2 Attach feet (C) using A screw (3) (Fig F) Fig F) 3 3. 3 E 2 D 1 3 D 4 3 3 5 BLIND 4. 3. 1 DOOR (Left) 4. C 5. 1. 5. B Fig G) STEP 5 A Secure the feet (C) K LIST 3 to the base (A) using screw (4) QTY (Fig G) 4. 2 4 crew 2 crew 8 rew 8 5 rew 19 4 Hang the baskets as shown. (Fig H) NOTE: Baskets show in forward position. They can be moved 4 to the rearward position for additional clearance. Bottom basket must hang from the 2nd wire from the top. E 4 4 2 D 5. 1 12” (305mm) A 4. 5. STEP 6 5 D 10” (256mm) 2 7-1/4 ” (184mm) l 1 1 1 1 4 B B 14” (357mm) 5 K LIST QTY 3. C 1. Fig H) (Left) 3. E 4 5 12” (305mm) 10” (256mm) K LIST QTY 2 crew 2 crew 8 rew 8 rew 19 1 1. 7-1/4 ” (184mm) 1 1 1 1 4 Fig E) (Left) 7-1/4” (184mm) 10” (256mm) K LIST QTY l 3. 2 D 1 1/2 4 4 7 Door Opening Full Height Blind Left B 5PSP-18 (RIGHT HANDED DOOR/18” OPENING) A Door Opening 1 2 3 4 5 (Right) 2 Handle Mount Base (Fig A) 4 M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 Note: If installing into a face M5x6mm flat-headed screw 8 5 frame cabinet, Slide Base A 5/32 x18mm wood screw 19 2. BLIND 7-1/4” (184mm) 10” (256mm) (Right) Faceframe 2 QTY 14” (357mm) 20141120-B01 B C Fig B) 3. 3 Base Attach Handles.1 1 Frame K LIST 2-TIER (FIG C) Foot 1 2 QTY 1 12” (305mm) Guide 1 1 channel 3-TIER (FIG D) Basket 4 1 2 2 8 8 3 A 4 5 D DD D 4 A (Left) Fig C) 1. (Left) 1. Optional Rear Handle 5. Position 1. B Fig D) 10” (256mm) PANELS CHECK LIST QTY3 1 5 Description STEP E E BE 2 7-1/4 ” (184mm) 3 4 C B 3. A 5PSP-15 4 Handle M4x10mm screw K LIST 8flat-headed 3 M6x10mm QTYwafer head screw 3.screw M5x6mm flat-headed 1 From Door Opening 1 FITTINGS LIST 1 CHECK 2 4 Description QTY l 1 4. 2 C (Left) m 3 B 12” (305mm) 1 Base CK LIST 1 Frame n QTY 1 Foot 1 2 2. 1 B Guide channel 1 STEP 2 1 Basket 4 1 Attach 2 the base (A) with slide channel (d) to floor3of cabinet TINGS CHECK A el 1 (Fig B)LIST Description QTY 4 2 Handle Pre-starting the CK LIST NOTE: 3 4 is mounting screws (4) M4x10mm flat-headed screw 2 n QTYrecommended M6x10mm wafer head screw 8 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 d screw 8 screw 8 5 screw 19 4. No. 1. To front of cabinet No. 5PSP-15 Description 1. D Fig A) must be flush with the face frame opening. ANELS CHECK LIST -15 E Door Opening FITTINGS CHECK LIST 3 STEP 1 Description QTY 7-1/4” (184mm) 10” (256mm) 2 (Right) 1 A 10” (256mm) D E 5 C 1 B 12” (305mm) Forward Handle Position C 10” (256mm) 1 1 Guide channelDoor Opening 1 Basket 4 8 19 Full Height Blind Left Shown with adjacent cabinet C 7-1/4 ” (184mm) Blind Portion Blind Portion of Cabinet of Cabinet 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening 2 2 A 2 7-1/4 ” (184mm) ew ew ew B Frame ew 19 C Foot 7-1/4” (184mm) 10” (256mm) 2 2 8 PANELS CHECK LIST Description QTY 1 A8 Base 5 Item No. 5PSP-15 4 1 3-TierDHandle Position 12” (305mm) 5. 2/2 800-626-1126 | rev-a-shelf.com D E 5 Fig E) 1 .3 STEP 4 Adjust front wheel position for right hand opening. (Fig E) 2 Attach feet (C) using A screw (3) (Fig F) 3 2 3 E 1 D 3 4 Fig F) D 3 3 5 4. BLIND 3. 5. DOOR (Left) 4. 1 1. C Fig G) B 5. 5 D E 10” (256mm) A STEP 5 3 Secure the feet (C) K LIST 3 to the base (A) using screw (4) QTY (Fig G) .5 2 4 crew 2 crew 8 rew 8 5 rew 19 A 7-1/4 ” (184mm) 2 4 2 .4 D .4 12” (305mm) 4 1 4 5. Fig H) 1. (Left) STEP 6 Hang the baskets as shown. (Fig H) 3. NOTE: Baskets show in forward position. They can be moved to the rearward position for additional clearance. Bottom basket must hang from the 2nd wire from the top. E 10” (256mm) 1 1 1 1 4 .2 3. B 12” (305mm) 4 K LIST QTY C 4 7-1/4 ” (184mm) 5 2. 7-1/4” (184mm) 10” (256mm) 1 1 1 1 4 K LIST QTY 2 crew 2 crew 8 crew 8 crew 19 l 3. B K LIST QTY 5 1. (Right) 15 l .2 2. 5 D 2 1 12” (305mm) 4 4 9 2/2 12400 Earl Jones Way, Louisville, KY 40299 (800) 626-1126 www.rev-a-shelf.com 10 800-626-1126 | rev-a-shelf.com 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com 800-626-1126 INSTRUCCIONES DE INSTALACIÓN / LES INSTRUCTIONS D’INSTALLATION SISTEMA DE CIERRE SUAVE CROMADO PARA ORGANIZADOR DE ESQUINA CIEGO 5PSP SYSTÈME 5PSP DE RANGEMENT POUR COIN MORT EN CHROME AVEC FERMETURE EN DOUCEUR Lista de partes: Liste des pièces: 1 8 11 11 4 4 #2 CHECK LIST 88 #2 PANELS 1 A Base 3 1 7 16 32 B CHECK Frame PANELS LIST 64 1 31 #2 #2 Foot C 16 Description QTY 811 33 77 Guide channel D 1 32 32 64 64 1 A Base Frame Basket 1 45 MIN Description QTY 5 5/32 x18mm wood screw 19 2 Handle 1 1 Cuidado/ Entretien: screw 41 2 3 2 2 M4x10mm flat-headed A 2 8 Limpie con paño húmedo 11 3 un M6x10mm wafer headyscrew 8 seque las partes. 22 4 M5x6mm flat-headed screw 8 5 Nettoyer avec un chiffon humide et essuyer pour complètement. 5 sécher 5/32 x18mm wood screw 19 Opciones de instalación: Options pour l’Installation: 2” 2” 5PSPSC-15 (15” de Apertura) 12 Puerta para mano 1” izquierda 5PSPSC-15 (Ouverture de 38.1cm (15”)) Porte vers le côté gauche (Left) 1” 1” 5PSPSC-15 (15” de Apertura) 14 Puerta para mano derecha 5PSPSC-15 (Ouverture de 38.1cm (15”)) Porte vers le côté droit 5PSPSC-18 (18” de Apertura) 16 Puerta para mano izquierda 5PSPSC-18 (Ouverture de 45.7cm (18”)) Porte vers le côté gauche 5PSPSC-18 (18” de Apertura) 18 Puerta para mano derecha 5PSPSC-18 (Ouverture de 45.7cm (18”)) 2. Porte vers le côté droit 12” (305mm) 32 Tercer nivel 3 niveaux 7 64 A B 3 20141120-B01 5 A 16 4 C 5 E 1 2” D (Left) Descripción / Description # Manija / Poignée 2 1” 1. Tornillo de cabeza plana M4x10mm Vis à tête plate M4x10mm 2 3 Tornillo de cabeza tipo barquillo M6x10mm Vis à tête avec rondelle M6x10mm 8 4 Tornillo de cabeza plana M5x6mm Vis à tête plate M5x6mm 8 90˚ 90˚2 5 1 (Left) Lista de partes de ajuste: Liste des pièces pour le Raccord: 90˚ D 5 8 10” (256mm) 2” B Segundo nivel 3 2 niveaux 4 FITTINGS CHECK LIST Tiempo estimado de ensamblado 1 C 5 Foot 2 QTY 5 Durée de l’installation:Description #1 8 D 16Guide 1channel 1 2 Handle #2 #1 M4x10mm flat-headed screw Basket 4 2 2 E 55 55 #1 #1 3 M6x10mm 88 wafer head screw 8 16 16 FITTINGS CHECK LIST 3 4 M5x6mm flat-headed screw 8 B C Lista de partes del panel: Liste des pièces du Panneau: Descripción / Description # Base/ Base 1 Marco/ Cadre 1 Pie/ Pied 1 D Canal Guía/ Canal de guidage 1 E Canasta/ Panier 4/6 A90˚ B C 12” (305mm) B 2 Tornillo de madera de 5/32 x18mm Vis à bois 5/32x18mm 19 3. 2 12” (305mm) Visite nuestro canal de YouTube para ver un video de instalación de este producto 1 Visitez notre chaîne YouTube pour une vidéo sur l’installation de ce produit Youtube.com/REVASHELF I-5PSPSC-TRI-1115 10” (256mm) B E 2 5PSP3-XXSC-CR 5PSP-XXSC-CR 1 7-1/4 ” (184mm) 33 88 QTY 1 8 10” (256mm) Item No. 5PSP-15 Description 7-1/4 ” (184mm) #2 3 #2 8 1 4 7-1/4 ” (184mm) 1 4 5PSP-15 Item No. 5 K LIST QTY 2 crew 2 crew 8 crew 8 crew 19 Door Opening Full Height Blind Right 2 B Door Opening Full Height Blind Right APersiana Blind Portion of Cabinet (Left) Full Height Blind Left Blind Portion of Cabinet Door Opening 5 Shown with adjacent cabinet 5PSP-15 (APERTURA DE PUERTA PARA MANO IZQUIERDA/15”) 5PSP-15 (PORTE VERS LE CÔTÉ GAUCHE/OUVERTURE DE 15”) Door Opening Puerta/ Porte 8 19 Door Opening Full Height Blind Left Shown with adjacent cabinet Coin mort 3 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening Door Opening E Door Opening D 4 5 1 Base de montaje (Fig A) 1. (Left) Fig A) 2. Nota: Si está instalando dentro de un gabinete con marco, la base del deslizante A, debe (Left) estar al ras con la apertura del marco Persiana Coin mort 1. 10” (256mm) Montez la base (Fig A) 10” (256mm) l 1 1 1 1 4 1 2 7-1/4 ” (184mm) Remarque : Si vous installez dans une armoire avec cadrage avant, la Base de la Coulisse A doit être à ras de l’ouverture du cadrage avant 3 B 7-1/4 ” (184mm) 4 QTY 2 4. 1 Cara del marco 12” (305mm) Cadrage avant Al frente del gabinete 12” (305mm) Vers l’Avant de l’Armoire 4 De la apertura de la puerta À Partir de l’Ouverture de la Porte 20141120-B01 2 Fig C B) 3. B Nota: Se recomienda pre iniciar con los LIST cuatro tornillos de ANELS CHECK -15 montaje. Description QTY 1 FITTINGS LIST 1 CHECK 2 12 Description QTY l 1 2 4 Handle 3. 3 A 3. B D C B A 4 E A 5 5. Posición opcional de la 1. trasera manija Position en Option de la Poignée Arrière D D D B Fig C) 10” (256mm) Fig D) E 4 (Left) 2 C B 1 (Left) 1. A1. C Posición de la A delantera manija Position de la poignée avant 10” (256mm) 2 B 800-626-1126 | rev-a-shelf.com 5. Posición de la manija de tres niveles Position de la poignée à trois niveaux 2 1/2 7-1/4 ” (184mm) 12” (305mm) 41 Base Segundo nivel (FIG C) 2 niveaux 1 Frame K LIST Foot 1 2 QTY 1 Guide 1 1 channel Tercer nivel (FIG D) Basket 43 niveaux 1 D 7-1/4 ” (184mm) Base Fixez la base1(A) avec le canal CK LIST de la coulisse 1 (d) au plancher nFrameQTYde l’armoire 1 (Fig B) Foot 1 2 1 Guide channel Remarque: Il1est recommandé 1 Basket de préparer 4les emplacements 1 des 2vis de montage (4) TINGS CHECK LIST 3 A el 1 Description QTY 4 2 Handle CK LIST 3 4 (Left) M4x10mm flat-headed screw 2 n QTY M6x10mm wafer head screw 8 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 d screw 8 m screwNo.85PSP-15 5 3 screw 19 PANELSSujete CHECK LIST las manijas QTY 1 Fixez les poignées. 5 Description C E 5 10” (256mm) No. Sujete la base (A) con el canal de guía (d) al piso del gabinete (Fig B) 5PSP-15 D E 12” (305mm) 2. 2. 3. Fig E) 1. (Left) 2. 4 Sujete el pie (C) usando el K LIST tornillo (3) (Fig F) QTY 1 Réglez la position de la roue 1 avant pour une ouverture vers 1 la gauche. (Fig E) 2 Fixez les pieds (C) en A utilisant la vis (3) (Fig F) QTY 13 K LIST QTY 1 21 4 crew 21 5 2 lcrew 81 Asegure el pie (C) a laAbase (A) tornillo (4) (Fig G) rew 84 usando 5 Krew LIST19 3 B 3 E 3 4. C Persiana Coin mort B 3. D 1 Puerta/ Porte 4. Fig G) D 5. 1. (Left) 6 5 Cuelgue las canastas como se muestra. (Fig H) 4 4 A (Left)4. 5. Fig H) 1. 2 1 12” (305mm) Accrochez les paniers comme indiqué (Fig H) Remarque: Les paniers sont montrés en position vers l’avant. Ils peuvent être déplacés vers l’arrière pour 4 laisser plus d’espace. Le panier du bas doit être suspendu du deuxième support à partir du haut. 5. 4 10” (256mm) 4. E 5 D 4 Nota: Las canastas se muestran en posición adelantada. Pueden moverse a la posición posterior para que exista un espacio adicional. La canasta inferior debe colgar del segundo cable de la parte superior. 5. D 7-1/4 ” (184mm) crew crew rew rew 19 2 C 3 Fixez les pieds (C) à la base (A) QTY à l’aide de la vis (4) (Fig G) 2 2 8 8 F) 3. 3. 10” (256mm) 1 l 1 K LIST4 Fig 14” (357mm) 3 E 7-1/4 ” (184mm) 5 7-1/4” (184mm) 10” (256mm) Ajuste la posición frontal del volante para apertura de mano izquierda (Fig E) 5 B 2. 2 4 1 12” (305mm) 3. 1/2 5 3. D 4 13 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening Door Opening Full Height Blind Left C D E Foot 1 Puerta/ Porte Guide channel 1 Basket 4 (Right) C 1 2 B 5PSP-15 (APERTURA DE PUERTA PARA MANO DERECHA/15”) 5PSP-15 (PORTE VERS LE CÔTÉ DROIT/OUVERTURE DE 15”) A Door Opening E Door Opening FITTINGS CHECK LIST 3 1 Description QTY 1 2 3 4 5 5 (Right) Fig A) 2 Handle Base de montaje (Fig A) 4 M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 Nota: Si está instalando dentro M5x6mm flat-headed screw 8 5 de un gabinete con marco, la 5/32 x18mm wood screw 19 7-1/4” (184mm) 10” (256mm) Persiana Blind Portion Coin mort of Cabinet 8 19 Full Height Blind Left Shown with adjacent cabinet 1. D 2. Persiana Coin mort base del deslizante A, debe estar al ras con la apertura del marco 7-1/4” (184mm) 10” (256mm) 4 screwItem No. 2 5PSP-15 screw PANELS 8 CHECK LIST QTY screw 8Description 5 1 A Base 1 Frame screw B 19 (Right) Remarque : Si vous installez dans une armoire avec cadrage avant, la Base de la Coulisse A doit être à ras de l’ouverture du cadrage avant Cara del marco Cadrage avant 7-1/4” (184mm) 10” (256mm) Montez la base (Fig A) 1. 3 B 2 4. 2 Al frente del gabinete 12” (305mm)1 Vers l’Avant de l’Armoire 12” (305mm) De la apertura de la puerta À Partir de l’Ouverture de la Porte 20141120-B01 4 C Fig B) 2 E Sujete la base (A) con el canal ANELS CHECK LIST -15 de guía (d) al piso del gabinete Description 1 (Fig B) QTY 3 3 A B D C C B A 4 A E Posición opcional de la 1. manija trasera Position en Option de la 5. Poignée Arrière D B 10” (256mm) Fig C) Fig D) D 3 E 2 2 C (Left)1 12” (305mm) FITTINGS LIST 1 14CHECK 2 Description QTY l 1 3. D (Left) Posición de la B 1. C manija A delantera Position de la poignée avant 1. A Posición de la manija de tres niveles Position de la poignée à trois niveaux B 800-626-1126 | rev-a-shelf.com 5. 10” (256mm) poignées. 1nivel (FIG C) Base Fixez les Segundo 2 niveaux 1 Frame K LIST Foot 1 2 QTY 1 4 Guide 1 1 channel Tercer nivel (FIG D) Basket 43 niveaux 1 3. 7-1/4 ” (184mm) 1 Base CK LIST Nota: Se recomienda pre iniciar 1 nFrameQTYcon 1los cuatro tornillos de Foot 1 2 montaje. 1 Guide channel 1 1 Basket Fixez la base4(A) avec le canal 1 de la2 coulisse (d) au plancher TINGS CHECK LIST (Fig B)3 A el 1 de l’armoire Description QTY (Left)4 Remarque: Il est recommandé 2les emplacements Handle de préparer CK LIST 3 M4x10mm4.flat-headed screw 2 des vis de montage4 (4) n QTY M6x10mm wafer head screw 8 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 wood screw 19 m x18mm No. 5PSP-15 d screw 8 screw 8 5 3 PANELS screw 19 CHECK LIST Description 1 QTY Sujete las manijas 5 5 1/4 ” mm) No. 5PSP-15 3. B 256mm) 2. 2/2 D 2 E 5 3. Fig E) 1. (Right) B .3 Ajuste la posición frontal del volante para apertura de mano izquierda (Fig E) Sujete el pie (C) usando el 2. 2 K LIST tornillo (3) (Fig F) QTY5 1 3 1 12” (305mm) B Réglez la position de la roue avant pourDl’ouverture vers la droite (Fig E) 2 Fixez les pieds (C) en A utilisant la vis (3) (Fig F) C Fig F) 3 3 Fixez K LIST 3 les pieds (C) à la base (A) QTY à l’aide de la vis (4) (Fig G) 3 2 4 crew 2 crew 8 .5 rew 8 5 6 rew 19 C Persiana 4. mort Coin 3. B Puerta/ Porte D 5. Fig G) E 5 D 1. D (Left) 4 .4 A (Left) 4 Fig H) .4 2 1. 1 12” (305mm) 10” (256mm) 5. 7-1/4 ” (184mm) 4 E Accrochez les paniers comme indiqué (Fig H) Remarque: Les paniers sont montrés en position vers l’avant. Ils peuvent être déplacés vers l’arrière pour laisser plus d’espace. Le panier du bas doit être suspendu du deuxième support à partir du haut. 5. 4. Cuelgue las canastas como se muestra. (Fig H) Nota: Las canastas se muestran en posición adelantada. Pueden moverse a la posición posterior para que exista un espacio adicional. La canasta inferior debe colgar del segundo cable de la parte superior. 3 10” (256mm) LIST KKLIST 3 QTY 1 4 21 4 crew 21 5 crew 81 2 el pie (C) a laAbase (A) lrew 81 Asegure 5 usando tornillo (4) (Fig G) 4 rew 19 E 7-1/4 ” (184mm) 1 1 1 1 4 .2 3. 7-1/4” (184mm) 10” (256mm) 4 5 l5 .2 2. 4 2 1 12” (305mm) 3. 4 5 D 15 2/2 1 QTY 192 2 8 8 19 2 4 Door Opening Door Opening A Full Height Blind Right 3 Full Height Blind Right 2 3 4 5 D M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 M5x6mm flat-headed screw 8 5/32 x18mm wood screw 19 4 5 Full Height Blind Left (Left) Shown with adjacent cabinet 5PSP-18 (APERTURA DE PUERTA PARA MANO IZQUIERDA/18”) D 5PSP-18 (PORTE VERS LE CÔTÉ GAUCHE/OUVERTURE DE 18”) Blind Portion of Cabinet Blind Portion Persiana of Cabinet Coin mort Door Opening Door Opening Puerta/ Porte Door Opening 5 E Door Opening Full Height Blind Left Shown with adjacent cabinet 5 4 Door Opening Door Opening 1 Door Opening 1. Fig A) (Left) Base de montaje (Fig A) 1. (Left) Nota: Si está instalando dentro de un gabinete con marco, la base del deslizante A, debe estar al ras con la apertura del marco 2. 7-1/4” (184mm) 10” (256mm) Persiana Coin mort B Montez la base (Fig A) Remarque : Si vous installez dans une armoire avec cadrage avant, la Base de la Coulisse A doit être à ras de l’ouverture du cadrage avant 7-1/4” (184mm) 10” (256mm) 21 1 21 84 IST 8 2 3 2 1 14” (357mm) Cara del marco Cadrage avant 4. 1 Al frente del gabinete 14” (357mm) Vers l’Avant de l’Armoire De la apertura de la puerta À Partir de l’Ouverture de la Porte 4 20141120-B01 Fig B) 3. C No. 5PSP-15 B 2 Sujete la base (A) con el canal ANELS CHECK -15 de guíaLIST (d) al piso del gabinete 5 D 3. B B D A 4 de l’armoire (Fig B) el TINGS CHECK LIST 1 3 A Description 4 Remarque:QTY Il est recommandé 1 1 Base 12”Segundo (305mm)nivel (FIG C) 2 niveaux1 Frame K LIST 4 Foot 1 2 QTY 1 Guide channel 1 1 Tercer nivel (FIG D) Basket 43 niveaux 1 FITTINGS LIST 1 CHECK 2 Description QTY l 1 16 4 Handle 3. 2 3 A D B Fig C) Fig D) 4 2 E (Left) 1. A 1. B 1 (Left) 2 C C Posición de la A manija delantera Position de la poignée avant B 5. 800-626-1126 | rev-a-shelf.com Posición de la manija de tres niveles Position de la poignée à trois niveaux 2 10” (256mm) screw 8 5 3 screw 19 PANELSSujete CHECK LIST las manijas QTY Fixez les poignées. 5 Description D 10” (256mm) m No. 5PSP-15 5. Posición opcional de la 1. trasera manija Position en Option de la Poignée Arrière E 5 DA 7-1/4 ” (184mm) 2les emplacements Handle CK LIST de préparer 3 des vis de montage (Left) 4 (4) M4x10mm flat-headed screw 2 n QTY M6x10mm wafer 2 head screw 8 M5x6mm screw 4 8 d screw flat-headed 5 2 5/32 x18mm wood screw 19 d screw 8 C 7-1/4 ” (184mm) 1 Base CK LIST Nota: Se recomienda pre iniciar 1 tornillos de nFrameQTYcon1los cuatro Foot 1 montaje. 1 2 Guide channel 1 1 Fixez la base (A) avec le canal Basket 1 de la 4 (d) au plancher 2 coulisse C E 10” (256mm) QTY 1 ” ) (Fig B) Description 2 1/2 D E 2. 3. 2. Fig E) (Left) 1. 2. 4 Ajuste la posición frontal del volante para apertura de mano izquierda (Fig E) Fig F) 2 5 1 2 Fixez les pieds (C) en utilisant A l 1 la vis (3) (Fig F) K LIST4 QTY 13 K LIST Persiana 5. Coin mort Puerta/ Porte D 4. 5. E Fig G) D 5 D 1. (Left) 4 4 A 7-1/4 ” (184mm) (Left)4. 5. 5. 4 10” (256mm) Cuelgue las canastas como se muestra. (Fig H) Fig H) 12” (305mm) Accrochez les paniers comme indiqué (Fig H) Remarque: Les paniers sont montrés en position vers l’avant. Ils peuvent être déplacés vers l’arrière pour 4 laisser plus d’espace. Le panier du bas doit être suspendu du deuxième support à partir du haut. C B 3. QTY à l’aide de la vis (4) (Fig G) 2 4 crew 2 crew 8 rew 8 5 4. 6 rew 19 Nota: Las canastas se muestran en posición adelantada. Pueden moverse a la posición posterior para que exista un espacio adicional. La canasta inferior debe colgar del segundo cable de la parte superior. E 1. 2 1 10” (256mm) 1 QTY 21 5 4 2 crew 21 lcrew 81 Asegure el pie (C) a laAbase (A) tornillo (4) (Fig G) rew 84 usando 5 Krew LIST19 Fixez 3 les pieds (C) à la base (A) 1 3 3 3 4. D C B 14” (357mm) 3. 3. 3 E 4 7-1/4 ” (184mm) Sujete el pie (C) usando el K LIST tornillo (3) (Fig F) QTY 1 Réglez la position de la roue 1 avant pour une ouverture vers 1 la gauche. (Fig E) B 2. 7-1/4” (184mm) 10” (256mm) 5 12” (305mm) 2 1 12” (305mm) 3. 1/2 5 3. D 4 17 Door Opening Full Height Blind Left Persiana Blind Portion Coin mort of Cabinet D E 1 1 Puerta/ Porte Guide channel 1 Basket 4 4 M5x6mm flat-headed screw 5 5/32 x18mm wood screw Door Opening 5 Full Height Blind Left Shown with adjacent cabinet 2 (Right) C 1 B 5PSP-18 (APERTURA DE PUERTA PARA MANO DERECHA/18”) 5PSP-18 (PORTE VERS LE CÔTÉ DROIT/OUVERTURE DE 18”) A Door Opening (Right) 2 Handle Base de montaje (Fig A) 4 M4x10mm flat-headed screw 2 M6x10mm wafer head screw 8 Nota: Si está instalando dentro M5x6mm flat-headed screw 8 5 de un gabinete con marco, la 5/32 x18mm wood screw 19 1. D Fig A) 2. Persiana Coin mort base del deslizante A, debe estar al ras con la apertura del marco (Right) 7-1/4” (184mm) 10” (256mm) Montez la base (Fig A) Remarque : Si vous installez dans une armoire avec cadrage avant, la Base de la Coulisse A doit être à ras de l’ouverture du cadrage avant E Door Opening FITTINGS CHECK LIST 3 1 Description QTY 1 2 3 4 5 8 19 7-1/4” (184mm) 10” (256mm) ew ew ew B Frame ew 19 C Foot 7-1/4” (184mm) 10” (256mm) 2 2 8 PANELS CHECK LIST Description QTY 1 A8 Base 5 Item No. 5PSP-15 4 Cara del marco Cadrage avant 1. 3 B 2 4. 2 Al frente del gabinete 14” (357mm) Vers l’Avant de l’Armoire 12” (305mm) 1 De la apertura de la puerta À Partir de l’Ouverture de la Porte 20141120-B01 4 C 3. B2 Fig B) Sujete la base (A) con el canal ANELS CHECK LIST -15 de guía (d) al piso del gabinete E 1 1 1 Base Segundo nivel (FIG C) 12”2 (305mm) niveaux 1 Frame K LIST Foot 1 2 QTY 1 Guide 1 1 channel Tercer nivel (FIG D) Basket 4 43 niveaux 1 FITTINGS LIST 1 CHECK 2 Description QTY l 1 18 2 4 Handle M4x10mm flat-headed 3. screw 2 3 A 4 D B D 4 E A Posición opcional de la manija 1. trasera Position en Option de la Poignée Arrière 5. D D B Fig C) Fig D) E (Left) 2 (Left) 2 B 1 B 5. 800-626-1126 | rev-a-shelf.com A 1. C A de la Posición manija delantera Position de la poignée avant 1. C 10” (256mm) screw 8 5 3 screw 19 PANELSSujete CHECK LIST las manijas Description QTY Fixez les poignées. 5 3 5 C Posición de la manija de tres niveles Position de la poignée 2 à trois niveaux 7-1/4 ” (184mm) m No. 5PSP-15 B 3. A C 10” (256mm) 1 Base CK LIST Nota: Se recomienda pre iniciar 1 nFrameQTYcon 1los cuatro tornillos de Foot 1 2 1 montaje. Guide channel 1 1 Basket Fixez la base4(A) avec le canal 1 de la2 coulisse (d) au plancher TINGS CHECK LIST (Fig B)3 A el 1 de l’armoire Description QTY 4 Remarque: Il2est recommandé Handle CK LIST de préparer 3 les emplacements 4 M4x10mm flat-headed screw 2 n(Left) QTYdes vis de montage (4) M6x10mm wafer head screw 8 4. 2 M5x6mm flat-headed screw 8 5 4 d screw 2 5/32 x18mm wood screw 19 3 d screw 8 10” (256mm) (Fig B) QTY 7-1/4 ” (184mm) Description ” m) No. 2. 5PSP-15 2 D 2/2 E 5 3. Fig E) B .3 4 2. Sujete el pie (C) usando el 2 12” (305mm) Réglez la position de la roue avant pourDl’ouverture vers la droite (Fig E) 2 Fixez les pieds (C) en A utilisant la vis (3) (Fig F) A Asegure el pie (C) a la base (A) 5 usando tornillo (4) (Fig G) 3 les pieds (C) à la base (A) Fixez à l’aide de la vis (4) (Fig G) 3 C Fig F) 3 E 3 B Puerta/ Porte 5. D 4. 5. Fig G) E 5 D D (Left) 1. 4 .5 .4 Cuelgue las canastas como se muestra. (Fig H) 4 (Left) 5. 7-1/4 ” (184mm) Nota: Las canastas se muestran en posición adelantada. Pueden moverse a la posición posterior para que exista un espacio adicional. La canasta inferior debe colgar del segundo cable de la parte superior. 10” (256mm) A 4 2 Fig H) 1. 1 12” (305mm) E Accrochez les paniers comme indiqué (Fig H) Remarque: Les paniers sont montrés en position vers l’avant. Ils peuvent être déplacés vers l’arrière pour laisser plus d’espace. Le panier du bas doit être suspendu du deuxième support à partir du haut. .4 10” (256mm) 6 B 7-1/4 ” (184mm) 5 4.mort Coin 3. 4 1 C Persiana 5 3 3 3 1 4 2 .2 3. Ajuste la posición frontal del volante para apertura de mano izquierda (Fig E) K LIST tornillo (3) (Fig F) QTY5 1 1 1 1 l5 1 4 K LIST K LIST QTY QTY 421 crew 21 crew 81 lcrew 81 4 crew 19 K LIST QTY 2 crew 2 crew 8 rew 8 rew 19 1. (Right) 7-1/4” (184mm) 10” (256mm) 15 .2 2. 4 2 1 12” (305mm) 3. 4 5 D 19 2/2 12400 Earl Jones Way, Louisville, KY 40299 (800) 626-1126 www.rev-a-shelf.com 20 800-626-1126 | rev-a-shelf.com ">
Публичная ссылка обновлена
Публичная ссылка на ваш чат обновлена.
