PDF
Document
Proline FP612W Manuel utilisateur | Fixfr
/

User questions

Q G

James Q.

How to use the self-cleaning function and are specific products required?

To use the self-cleaning function, ensure the drum is empty, turn the program selection knob to the self-cleaning position, and press the Start/Pause button. No specific cleaning product is mandatory for this cycle, but using detergents not recommended by the manufacturer can damage the device.

Q G

James Q.

How to use the auto-cleaning function and which products are required?

To use the auto-cleaning function, ensure the drum is empty, turn the selection knob to the 'Auto-Cleaning' position, and press the Start/Pause button. For initial or regular drum maintenance, a small amount of detergent may be used in compartment II, or non-chlorine detergents for specific rust cleaning. Do not use cleaning products not recommended by the manufacturer.

Q G

James Q.

How to use the auto-cleaning function and what products should be used?

To use the auto-cleaning function, empty the drum, set the program selection knob to the 'Auto cleaning' position, and press the Start/Pause button. For a first empty cycle, a small amount of detergent can be added to compartment II. For drum maintenance, only use chlorine-free detergents.

Q G

James Q.

How to operate the auto-cleaning function and which cleaning products are required?

To use the auto-cleaning function, ensure the drum is empty, turn the selection knob to the 'Auto nettoyage' position, and press the Start/Pause button. For the first wash, a small amount of detergent should be placed in compartment II. For regular maintenance, use chlorine-free detergents to remove rust from the drum.

Q G

James Q.

How to perform the auto-cleaning cycle and which detergents are recommended?

To use the auto-cleaning function, ensure the drum is empty, set the program selector to 'Auto Cleaning', and press the Start/Pause button. For the initial cycle, a small amount of detergent can be added to compartment II. For general maintenance, use chlorine-free detergents to remove rust.

Q G

James Q.

How to use the auto-cleaning function on the washing machine and what products should be used?

To use the auto-cleaning function, ensure the drum is empty, turn the program selector to the 'Auto cleaning' position, and press the Start/Pause button. For the first wash cycle, it is recommended to use a small amount of detergent in compartment II. For regular maintenance of the drum, specifically for rust, use chlorine-free detergents.

Q G

James Q.

How to use the auto-cleaning function and which cleaning products are required?

To use the auto-cleaning function, ensure the drum is empty, turn the program knob to the 'Auto-cleaning' position, and press the Start/Pause button. For the initial empty cycle, a small amount of detergent can be used in compartment II. For regular maintenance of the drum, use chlorine-free detergents.

Q G

James Q.

How to use the auto cleaning function?

Ensure the drum is empty, turn the selection knob to the 'Auto cleaning' position, and press the Start/Pause button.

Q G

James Q.

How to use the auto-cleaning function and what products should be used?

Empty the drum, select the 'Auto Cleaning' program on the control panel, and press Start/Pause. For the first wash, a small amount of detergent can be used in compartment II. For rust removal, use only non-chlorine detergents.

W C

Michael W.

What should be done if the machine does not start and the lock indicator flashes accompanied by a double beep?

Ensure the door is properly closed and locked. If the safety system is engaged, disconnect the device from the power outlet and then reconnect it.

W C

Michael W.

What to do if the machine does not start and the padlock light flashes with a double beep?

If the washing machine does not start and the padlock indicator light flashes with a double beep, this may indicate an error message. Check the following: - Is the door properly closed? Make sure it is correctly locked. - Is the safety system activated? Try unplugging the machine from the wall socket. - Basic checks: Ensure the appliance is properly plugged in, that power is restored, and that the machine is correctly switched on.

Preparing document for printing…
0%