Illustrated Parts Manual Two Stage Snow Thrower — Polar Blast 4510 TROY-BILT LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Form No. 769-07038 (June 03, 2011) To The Owner Thank You Thank you for purchasing an MTD Snow Thrower. It was carefully engineered to provide excellent performance when properly operated and maintained. All information in this manual is relative to the most recent product information available at the time of printing. Please be aware that this Illustrated Part’s Manual may cover a range of product specifications for various models. Components listed and/or illustrated in this manual may not be applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation. Throughout this manual, all references to right (RH) and left (LH) are observed from the operating position. Table of Contents Augers, Auger Housing & Gearbox......................... 4 Engine Model 490-SUA...........................................12 Handles, Handle Panel & Discharge Chute............ 6 Label Map................................................................11 Snow Thrower Drive System................................... 8 Record Product Information Model Number To ease in ordering replacement parts, please locate the model plate on the equipment and record the information in the provided area to the right. You can locate the model plate by standing at the operator’s position and looking down at the rear of the deck. Serial Number Painted Parts When ordering painted service parts, a four digit color suffix must be added to the part number (e.g. 783-XXXXX-0637). Please refer to the table below for current color codes: 2 0637 Black 0674 Yellow (Yard-Man) 0709 Dark Green (Bolens, Yard-Man) 0650 Metallic Red (White Outdoor) 0662 Oyster Gray (MTD Gold) 0629 Silver Flake (MTD Platinum) 0638 Red (Yard Machines, Huskee, Troy-Bilt, MTD) 04038 Day Orange (Daedong) 0691 Black Jack (MTD Gold, MasterCut) 04033 Flint Mica (Troy-Bilt XP) This page left intentionally blank. 3 Augers, Auger Housing, and Gearbox 14 70 10 30 1 24 26 21 26 19 21 11 8 18 4 71 16 3 17 46 23 9 22 11 6 20 29 7 33 11 31 35 17 11 7 37 40 12 2 36 34 7 49 11 11 6 39 43 15 5 13 41 25 48 45 38 12 44 51 43 62 64 52 68 63 66 47 67 61 51 55 59 65 67 4 69 56 64 58 57 63 60 69 51 68 53 54 50 14 32 27 51 28 42 50 Augers, Auger Housing, and Gearbox Ref. Part Number Description Ref. Part Number Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 918-0281A 684-0090B 731-2635 931-2643 710-0376 710-04484 710-0451 710-04606A 710-1245B 911-0677 712-04063 712-04065 914-0135 714-04040 915-0118 725-0157 926-04012 731-1696B 732-0858 936-0159 736-0174 736-0188 736-0505 936-3008 736-3046A 938-0281 738-04155 741-0192 941-04024 747-0980A 748-04067A 950-04020 756-04244A 790-00264A 05244B 710-3008 Bracket Assembly, Auger Brake Impeller , 16” Clip, Mounting Tool, Clean-out Screw, Hex Cap, 5/16-18 x 1.0 Gr5 Screw, 5/16-18 x .750 Screw, Carriage, 5/16-18 x .75 Screw w/Stud, 5/16-18 x .4300 Screw, Hex Cap Lock, 5/16-24, 875 Ferrule Nut, Hex Flange Lock, 5/16-18 Nut, Hex Flange Lock, 3/8-16 Key, Woodruff, 1/4 x 3/4 Pin, Bow-tie Cotter Pin, Spiral, 5/16 x 1.75 Cable Tie Nut, Push Adapter, Chute, 6” Spring, Extension Washer, Flat, .349 x .879 .063 Washer, Wave, .625 x .885 x .015 Washer, Bell., .78 x 1.49 x .06 Washer, Flat, .34 x 1.5 x .15 Ht. Washer, .344 x .75 x .12 Washer, 1.01 x 1.86 x .06 Screw, Shoulder, .625 x .17 Pin, Shear, .25 x 1.75 Bearing, Flange w/Flats Bearing, Self Aligning Rod, Auger Idler Adapter, Pulley w/Pins Spacer, 1.004 x 1.375 x .25 Pulley, Auger Drive, 10.0 Bracket, Gear Box Support Housing, Bearing Screw, 5/16-18 x .75 GR5 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. 749-04485 929-0071A 710-0389 710-3168 784-5697 784-0315A 918-04514 684-04151 684-04152 684-04223 731-05163 738-04159 790-00280 937-3000 741-0494 918-0246 918-0435 710-1260A 711-04714 914-0126 914-0135 716-0111 917-0299 917-1425 921-0145 721-0325 936-0266 936-0291 738-0275 741-0184 941-0217 921-0146 741-0670 712-3007 749-04489 Tube, Support , LH Extension Cord, 110V Screw, Carriage, 3/8-16 x .75 Screw, Carriage, 3/8-16 x 1.00 Skid Shoe Housing, Bearing Gear Box Assembly Spiral Assembly, LH Spiral Assembly, RH Housing, Auger - 45” Spacer, 1.50 x 1.00 x 1.00 Axle, Spiral Shave Plate, 45” Grease Fitting, 3/16 Flange Bushing Housing Assembly, Auger, RH Housing Assembly, Auger, LH Screw, LD, 5/16-18 x .750 Auger Drive Shaft Key, Hi Pro, 3/16 x 3/4 Key, 1/4 x 3/4 Dia. External Retainer Ring Gear, Worm Gear, Worm, LH Seal, Oil Plug Wash, Flat, 1.52ID x 2.0 OD Wash, Flat, .88 ID x .38 OD Worm Gear Shaft Bearing, Thrust Sleeve Oil Seal Flange Bearing Jam Nut, 5/16-18 Tube, Support, RH 5 Handles, Handle Panel & Discharge Chute 24 37 30 29 48 44 20 32 45 40 22 36 31 25 33 72 31 27 41 39 32 28 34 77 21 38 50 12 46 19 4 43 5 73 49 70 13 55 78 79 81 62 80 74 17 71 53 62 68 76 8 10 6 12 15 14 9 6 6 52 69 67 59 75 65 60 66 11 65 56 54 58 63 61 57 7 16 3 26 47 51 18 37 1 22 35 42 2 11 23 64 Handles, Handle Panel & Discharge Chute Ref. Part Number Description Ref. Part Number Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 716-04036 725-0157 731-04913 738-04126 984-04230 710-0276 710-04187 710-0458 710-0597 710-0895 712-04063 712-04064 731-0846C 731-0851A 731-0903E 731-1313C 936-0231 784-5594 631-04133A 631-04134B 931-05332A 646-0012 684-04105B 684-04106B 684-04250 710-04326 710-04586 710-0599 710-0837 710-1233 710-3069 712-04081A 720-04039 777X41805 725-04393 725-05148 725-05149 725-1629 925-1649 731-04894D 731-04896B E-Ring Cable Tie Trigger Lock Pin, 3/16 Chute Control Assembly Carriage Screw, 5/16-18 x 1.0 Screw, 1/4-15 x .50 Carriage Screw, 5/16-18 x 1.75 Hex Screw 1/4-20 x 1.0 Screw, 1/4-15 x .750 Flange Lock Nut 5/16-18 Flange Lock Nut 1/4-20 Upper Chute, 6.0 Chute Flange Keeper Lower Chute Cbl. Guide, Chute Tilt Flat Wash, .344 x 1.125 x .12 Cable Bracket Handle Assembly, LH Handle Assembly, RH Handle Panel Cable Ass’y, Auger/Drive Engagement Handle, LH Engagement Handle, RH Clutch Lock Rod Assembly Screw, #8-16 x .50 Screw, 1/4-20 x 1.625 Hex Screw, 1/4-20 x .5 Screw, #10-16 x .625 Screw, #10-24 x 1.375 Screw, 1/4-20 x .50 Nut, Hex, 1/4-20 Shift Knob Lens Lable Heated Grip Switch Wire Harness Heated Grip Lamp, 12.8V Light Socket Lock Plate Clutch Lock Cam 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. 72. 73. 74. 75. 76. 77. 78. 79. 80. 81. 732-0193 732-04219C 732-04238 935-0199A 936-0267 738-04125 738-04348 746-04341 790-00248C 790-00281B 684-04308A 684-04350 710-04682 710-0572 710-3118 912-3010 914-0101 914-0104 715-04095 720-0201A 920-0284 926-0100 735-0234 736-0105 936-0159 936-0185 736-0242 941-0475 747-04747 747-04925A 749-04674 749-04675 749-0991 790-00329 715-0150 731-05319 710-04022 732-04677 936-0264 936-0159 Compression Spring Clutch Lock Spring Torsion Spring, .8156 ID x .3038 Rubber Bumper Flat Washer, .385 x .87 x .06 Screw, Shldr., .374 x 1.05 Screw, Shldr., .437 x 1.345 Clutch Cable Panel Bracket Shift Lever Chute Crank Assembly Joint Block Assembly Hex Screw, 3/8-16 x 2.00 Carriage Screw, 5/16-18 x 2.5 Screw, Hex, 3/8-16 x 1.00 Nut, Hex, 5/16-18 Internal Cotter Pin Internal Cotter Pin Spring Pin, .156 dia. x .875 Lg. Knob, Crank Knob, Wing Nut, 5/16-18 Push Cap, 3/8 Rubber Grommet Bell Wash, .375 x .87 x .063 Flat Washer, .349 x .879 x .063 Flat Wash, .375 x .738 x .063 Wash, Bell, .34 x .872 x .06 Plastic Bushing, .38 ID Eye Bolt, .70 Dia. Chute Rod, .375 Dia. x 29.72 Handle, Upper, RH Handle, Upper, LH Handle, Lower Chute Crank Bracket Roll Pin, 3/16 Dia. x 1.100 Lens Hex Screw, M8-1.25 Cable Guide Flat Washer, .330 x .630 x .0635 Washer, Flat, .349 x .879 7 Snow Thrower Drive System 100 86 90 97 81 98 22 85 79 87 82 75 92 77 93 84 99 74 83 76 91 88 73 95 96 94 80 101 53 65 78 104 9 109 35 50 22 72 56 37 32 4 26 57 69 27 63 64 26 51 44 11 22 33 55 6 58 54 62 21 25 5 11 33 16 28 59 60 2 18 68 8 19 19 61 45 89 108 70 7 36 3 16 37 24 41 57 49 12 1 34 17 31 31 52 66 47 29 106 15 107 53 54 62 105 12 40 20 51 39 13 67 14 103 46 30 48 38 50 31 43 71 10 12 23 65 16 42 8 102 Snow Thrower Drive System Ref. No. Part No. Description Ref. No. Part No. Description 1. 05244B Housing, Bearing 40. 936-0864 Wash, .375 x .812 x .060 2. 618-0279P Dogg, Steering Drive, LH 41. 936-0329 Washer, Lock, 1/4 3. 618-0280P Dogg, Steering Drive, RH 42. 711-04615 Pin, Clevis 4. 918-0282E Shaft Assembly, Steering 43. 914-0149B Pin, Internal Cotter 5. 918-04178 Assembly, Friction Wheel 44. 937-3000 Fitting, Lube, 3/16 Drive 718-04034 Wheel, Friction, Bonded 45. 738-0143 Screw, Shldr., .498 x .34 710-0896 Screw, Hex Wash 46. 738-0279 Spindle, Drive Plate 684-0118B Bracket, Auger Actuator 47. 738-0924A Screw, Hex Shldr., 1/4-28 741-0163A Ass’y, Bearing/Housing 6. 7. 684-0119B Bracket, Drive Actuator 48. 8. 710-0751 Hex Head Screw, 1/4-20 49. 941-04025 Bearing, Self Aligning 9. 684-04229 Rod Assembly, Shift 50. 741-04108 Bearing, Hex Flange 941-0563 Bearing, Ball 10. 684-04212 Brkt, Friction Drive Suprt. 51. 11. 684-04235 Sprocket, 32T 52. 741-0747 Bush, Flg, .5625 ID x 1.375 x .4375 12. 710-04484 TT Screw, 5/16-18 x .750 53. 741-0748 Bush, Flg, .5 ID x .627 OD 13. 710-0538 Screw, Hex Cap Lock, 54. 946-04337A Cable, Steering 14. 710-0599 Screw, Hex, 1/4-20 x .50 55. 946-0951A Cable, Auger Idler 15. 712-04063 Flange Lock Nut 5/16-18 56. 747-0973 Rod, Drive Clutch 16. 710-1652 Screw, Hex Wash. 57. 750-04703 Spacer, 1.01 x 1.50 x .93 17. 710-3001 Screw, Hex Cap, 3/8-16 58. 750-04717 Spacer, .49 x 7.865 18. 911-04279 Shaft, Hex Drive 59. 750-04718 Spacer, .49 x 3.545 19. 711-04605 Shaft, Actuator 60. 750-05342 Spacer, .566 x .87 x .190 20. 912-0116 Nut, Hex Insert Jam Lock 61. 750-05343 Spacer, .566 x .87 x 1.25 21. 912-0138 Nut, Hex, 1/4-28 GR5 62. 750-0903B Spcr., .514 x .632 x 2.44 22. 712-04065 Nut, Hx Flnge Insert Lk 63. 950-0997 Spacer, .675 x 1.0 x .23 750-1302B Spcr, .6725 x 1.125 x 2.48 23. 912-0413 Nut, Hx Insert Jam Lk 64. 24. 712-0717 Nut, Insert 3/8-16 65. 756-0344 Pulley, Drive 25. 713-0284 Chain, Endless, #41 x 36L 66. 756-0625 Roller, Cable 784-0404 Retainer Bracket 26. 713-0286 Chain, #420 x 40L 67. 27. 913-04015 Sprocket, #41 x 10T 68. 784-0406A Bracket, Frame Support 28. 914-0104 Pin, Internal Cotter 69. 784-0407 Bracket, Axle Support 29. 914-0135 Key, Woodruff 70. 790-00257 Cover, Upper Frame 30. 914-0388 Key, Hi-Pro, 3/16 x 5/8 71. 790-00259 Cover, Lower Frame 31. 916-0104 E-Ring 72. 790-00349 Trans Frame 32. 716-0136 Ring, Retaining 73. 684-04169 Idler Pulley Assembly 33. 716-04048 Ring, Retainer 74. 710-0627 Screw, Hex 5/16-24 x .75 34. 917-0302 Plate, Drive 75. 710-0191 Screw, Hex 3/8-24 x 1.25 35. 726-0221 Speed Nut, .500 76. 710-0607 Screw, Hx Wash Hd Tapp 36. 932-0121 Spring, Extension 77. 710-0624 Screw, Hex Cap, 5/16-24 x 1.50 37. 932-0209 Spring, Extension 78. 710-0654A Screw, 3/8-16 x 1.00 38. 936-0158 Washer, Lock, 5/8 79. 710-0809 Screw, 1/4-20 x 1.25 Wsh, Bell., .34 x .872 x .06 80. 738-04439 Screw, Shldr., .500 x .145 39. 736-0242 Continued on following page 9 Snow Thrower Drive System (Continued) Ref. No. 10 Part No. Description 81. 710-0347 Screw, Hex Cap, 3/8-16 x 1.75 82. 714-0118 Key, Square, 1/4 x 1.5 83. 926-04012 Nut, Push 84. 931-2531 Cover, Belt 85. 732-04308A Torsion Spring, .850 dia. x .333 lg. 86. 936-0119 Washer, Lock, 5/16 87. 736-0247 Washer, Flat, .406 x 1.25 88. 736-3092 Washer, Flat, .265 x 1.0 x .030 89. 712-04064 Flange Lock Nut 1/4-20 90. 748-04112B Shldr. Spacer, .3175 x .500 x .094 91. 750-04571 Shldr. Spacer, .260 x .785 x .538 92. 750-04821 Shoulder Spacer, .340 x 1.00 93. 750-05316 Spacer, 1.02 x 1.63 x .1425 94. 954-04194A V-Belt, 4L x 44.60 95. 954-04202 V Belt, 3/8 x 36.68 96. 756-04224 Pulley, Flat Idler, 2.75 OD 97. 756-0241B Double Pulley, 3.25 x 2.75 98. 784-0385D Bracket, Auger Idler 99. 790-00167A Belt Keeper Bracket 100. 790-00208C Idler Drive Wheel Bracket 101. 790-00254A Belt Cover Bracket 102. 634-0225A Wheel Ass’y. - LH 634-0226A Wheel Ass’y. - RH 734-2031 Tire 734-1124A Rim Assembly 934-0255 Valve 103. 711-04606A Axle, Wheel, 45” 104. 732-04385 Torsion Spring, .750 I.D. x .968 Lg. 105. 936-3015 Flat Washer, .469 x .875 x .105 106. 738-04184A Shoulder Screw, .368 x .113 107. 750-04719 Spacer, .515 ID x .750 OD x .220 108. 790-00217A Speed Selector Pivot Bracket 109. 790-00218A Speed Selector Shift Bracket Label Map 777D13679 777I23440 777I23041 777I22363 Facing Operator OPERATORS VIEW 777S32280 777S32636 Front Top Of Auger Housing Cut Foot Pictorial Facing Away From Operator DANGER 777D15826 Front Of Engine Facing Away From Operator Below Yellow Oil Cap, Place On Lower Steel Part Of Fuel Tank DANGER OHV 420cc NEVER PUT HAND IN CHUTE. CONTACT WITH ROTATING PARTS CAN AMPUTATE FINGERS AND HANDS. SHUT OFF ENGINE AND WAIT UNTIL ALL MOVING PARTS HAVE STOPPED BEFORE UNCLOGGING. USE CLEAN-OUT TOOL OR WOODEN STICK TO UNCLOG DISCHARGE CHUTE. CLEAN-OUT TOOL AVOID INJURY FROM ROTATING AUGER KEEP HANDS, FEET AND CLOTHING AWAY. 777D16463 1. KEEP AWAY FROM ROTATING IMPELLER AND AUGER. CONTACT WITH IMPELLER OR AUGER CAN AMPUTATE HANDS AND FEET . 2. USE CLEAN-OUT TOOL TO UNCLOG DISCHARGE CHUTE. 3. DISENGAGE CLUTCH LEVERS, STOP ENGINE, AND REMAIN BEHIND HANDLES UNTIL ALL MOVING PARTS HAVE STOPPED BEFORE UNCLOGGING OR SERVICING MACHINE. 4. TO AVOID THROWN OBJECTS INJURIES, NEVER DIRECT DISCHARGE AT BYSTANDERS. USE EXTRA CAUTION WHEN OPERATING ON GRAVEL SURFACES. 5. READ OPERATOR'S MANUAL. DANGER 777D14940 P OL AR B LAST lectric Start Touch ‘n Turn Steering Remote Chute Control 4510 45 777D14861 On Engine Spinner Clearing Width 11 490-SUA Muffler & Controls 1 2 3 10 6 3 10 3 11 7 3 3 9 10 3 12 13 14 15 12 4 5 3 Ref. Part Number Description 1 710-04915 Bolt M6×12 2 951-11339 Muffler Shield 3 710-04915 Bolt M6×12 4 951-10757 Throttle Control Knob 5 951-11595 Control Panel 6 951-10637 Key Switch Base 7 731-05632 Key 9 951-11302 Choke Knob 10 710-04914 Bolt M6×10 11 951-11181 Exhaust Pipe Shield 12 951-11321 Carb Isolator Bracket 13 710-04968 Bolt M6×16 14 951-11338 Muffler Assembly 15 712-04219 Nut, M8 490-SUA Carburetor 130 131 132 133 134 135 139 140 141 136 137 Ref. Part Number 130 710-05392 131 132 141 142 142 Ref. Part Number Stud M6-8×100 i N/A Idle Speed Adjusting Screw 710-05056 Stud M6-8×118 j N/A Mixture Screw 951-11315 Carburetor Insulator Gasket k 751-11991 Primer Hose 951-11906 Hose Clamp Description Description 133 951-11353 Carburetor Insulator l 134 951-11354 Carburetor Gasket m N/A Carburetor Body 135 951-11352A Carburetor Assembly n N/A Float Pin 136 951-10639A Primer Assembly o N/A Emulsion Tube 137 951-11824 Primer Bulb p N/A Needle Valve 139 951-11304 Heater Box q N/A Main Jet 140 951-11192 Choke Control r N/A Needle Valve Spring 141 736-04477 Lock Washer s N/A Float 142 712-04212 Nut M6 t 951-11970 Fuel Bowl Gasket a N/A Choke Shaft u N/A Fuel Bowl b N/A Lock Washer v 951-11348 Fuel Bowl Gasket 710-04945 Fuel Bowl Mounting Bolt c N/A Screw M3×5 w d N/A Choke Plate x 951-11349 Fuel Drain Plug Gasket e N/A Throttle Shaft y 710-04938 Fuel Drain Plug f N/A Throttle Plate 951-11355A Carburetor Kit - Major g N/A Lock Plate h N/A Idle Jet Assembly (Incl.g,h,I,n,o,p,q,r,s,t,v,x) 13 490-SUA Crankcase 76 75 71 74 66 66 66 66 66 69 66 70 64 73 65 63 62 67 58 66 57 50 62 63 144 145 41 49 43 42 56 45 59 61 60 55 52 51 53 54 44 43 50 77 81 78 79 80 14 146 490-SUA Crankcase Ref. Part Number 41 951-11951 Ref. Part Number Connecting Rod Assembly 68 710-05052 Bolt M8×35 710-04968 Bolt M6×16 Description Description 42 951-12092 Piston 69 43 951-11953 Piston Pin Snap Ring 70 951-11320 Dipstick Clamp 44 951-11954 Piston Pin 71 710-04966 Bolt M6×8 45 951-12593 Piston Ring Set 73 951-11381 Oil Fill Tube O-Ring 49 951-11956 Governor Gear/Shaft Assembly 74 951-11972 Oil Fill Tube Assembly 50 951-11373 Radial Ball Bearing, 6202-P6 75 951-11904 Dipstick O-Ring 951-11971A Dipstick Assembly 951-11359A Crankcase Kit 51 736-04453 Washer 8×20×0.8 76 52 714-04077 Cotter Pin 77 53 951-11958 Governor Seal 54 951-11365 Governor Arm Shaft 78 951-11350 Oil Drain Pipe Assy. 55 951-11358 Crankshaft Kit 79 736-04440 Washer 10×16×1.5 (Incl.50,55,56,65,81) 80 710-04906 Oil Drain Plug 951-11499 Oil Seal 35×52×7 (Incl.50,53,77,81) 56 951-10307 Woodruff Key 81 57 715-04102 Dowel Pin 9×12 143 951-12095 Balance Shaft Assembly 58 715-04092 Dowel Pin 7×14 144 951-11969 Bearing, 6207-P6 59 951-11959 Camshaft Assy. 146 951-10641 Oil Drain Assembly 60 951-11376 Crankcase Cover Gasket 952Z490-SUA Complete Engine 61 736-04476 Washer 16×24×0.5 951-11362 Gasket Kit - Complete 62 951-11960 O-Ring 16×3 (Incl.53,60,65,79,81,106, 63 951-11345 Oil Filler Plug Assembly 108,125,132-134) 64 951-11340 Crankcase Cover Kit 951-11360A Short Block Assembly (Incl.50,60,61,64-68) (Incl.41-45,49-61,63-68,77-81, 65 951-11375 Oil Seal, 30×46×8 102,105,106,108,111,112, 66 710-04971 Bolt M8×38 125,132,133,143) 67 710-04972 Bolt M8×45 15 490-SUA Fuel Tank & Mounting 16 17 18 19 18 19 21 18 18 20 20 40 39 25 27 26 22 25 28 28 26 29 35 33 34 23 29 30 26 29 29 36 38 37 16 Ref. Part Number 16 951-12532 17 18 Description 31 25 24 26 25 Ref. Part Number Description Fuel Cap Assembly 28 951-11700 Fuel Hose Clamp 951-11933 Fuel Level Indicator 29 710-04921 Bolt M8×14 710-04970 Bolt M8×20 30 951-11182 Gas Tank Support Bracket 712-04219 Nut M8 19 750-05312 BushⅠ, Gas Tank 31 20 750-05313 Bush Ⅱ, Gas Tank 33 712-04212 Nut M6 21 951-11201 Fuel Tank Assembly 34 710-04908 Governor Arm Bolt 22 951-11319 Left Trim Plate 35 951-11307 Governor Arm 23 951-11318 Rear Mainting Bracket Assy. 36 951-11306 Governor Spring 24 951-11351 Right Trim Plate 37 951-11203 Throttle Linkage Spring 951-11309 Throttle Linkage 25 710-04968 Bolt M6×16 38 26 736-04452 Bush 39 951-11311 Primer Bracket 27 951-11336 Fuel Line Kit 40 710-04915 Bolt M6×12 490-SUA Starter & Blower Housing 87 83 84 86 85 82 47 48 48 83 48 48 85 88 90 91 93 95 93 92 96 89 97 98 93 93 Ref. Part Number 46 710-04965 47 48 97 98 97 Ref. Part Number Bolt M4×55 89 951-11313 Fan, Cooling 951-11196 Startup Electromotor 90 951-11314 Pulley, Starter 710-04967 Bolt M8×55 91 712-04220 Nut, Special, M16×1.5 710-04968 Bolt M6×16 Description 98 Description 82 951-11305 Ignition Coil Assembly 92 83 710-05350 Ignition Coil Bolt 93 710-04915 Bolt M6×12 84 951-11961 Coil Assy., Charge 95 951-11211 Blower Housing 85 710-04969 Bolt M6×30 96 951-11310 Recoil Starter 86 710-04966 Bolt M6×8 97 736-04455 Gasket 6 87 951-11186 Alternator Wire Clamp Brkt 98 710-04974 Bolt M6×10 88 951-11312 Flywheel 17 490-SUA Cylinder Head 107 108 116 115 117 126 124 123 100 101 114 104 113 116 125 105 112 117 145 105 109 110 111 106 122 115 114 112 103 120 121 112 118 123 124 121 120 122 119 124 124 124 18 127a 128 129 127 129 102 490-SUA Cylinder Head Ref. Part Number Ref. Part Number 100 951-11337 101 951-11337 Valve Kit 120 710-04962 Bolt, Pivot Valve Kit 121 951-11966 Rocker Arm 102 951-11962 Tappet 122 751-11123 Adjusting Nut ,Valve 103 951-11335 Push Rod Kit 123 751-11124 Nut, Pivot Locking 104 951-12592 Cylinder Head Kit 124 710-05054 Valve Cover Bolt (Incl.106,111-113,125) 125 951-11967 Valve Cover Gasket 951-11220 Valve Cover Description Description 105 715-04097 Dowel Pin 12×20 126 106 951-12094 Gasket, Cylinder Head 127 951-11221 Breather Hose 107 951-10292 Spark Plug/F6Rtc 127a 726-04101 Breather Hose Clamp 108 951-11212 Exhaust Pipe Gasket 128 951-11317 Air Shield 109 710-04964 Stud M8×48.5 129 710-04915 Bolt M6×12 109 951-11207 Muffler Stud Assembly 145 951-11333 Valve Cover Kit Complete Engine Gasket Kit - External 110 736-04478 Dish Flexibility Washer 952Z490-SUA 111 710-05407 Bolt M10×1.25×65 951-11363 112 710-05053 Bolt M10×1.25×87 113 951-11964 Intake Valve Seal 114 951-12077 Valve Spring Retainer 115 951-12078 Valve Spring 116 951-12080 Retainer, Ex.Valve Spring 117 951-12081 Adjuster, Exh Valve (Incl.100,101,104,106,108,109, 118 951-11965 Push Rod Guide 111-118,120-123,125,130-133) 119 951-11981 Rocker Arm Assembly (Incl.79,108,125,132-134) 951-11362 Gasket Kit - Complete (Incl.53,60,65,79,81,106,108, 125,132-134) 951-11361A Cylinder Head Ass'y 19 490-SUA Label Map 777S33614 777I23018 PRIMER AMORCEUR 777I23039 IGNITION ALLUMAGE 777I23027 RUN STOP STOP For Household and Commercial Use. Pour utilisations résidentielle et commerciale. For Household and Commercial Use. Pour utilisations résidentielle et commerciale. WARNING - Risk of electric shock. Connect to a properly grounded outlet only. Risk of electric shock. Keep extension cord connection dry and off the ground. Do not expose to rain, store indoors. AVERTISSEMENT-Risque de secousse électrique. N'utiliser qu'une prise de courant correctement mise à la terre. Risque de secousse électrique. La rallonge électrique doit rester sèche et ne pas toucher le sol. La protéger des intempéries et la remiser à l'intérieur. WARNING - Risk of electric shock. Connect to a properly grounded outlet only. Risk of electric shock. Keep extension cord connection dry and off the ground. Do not expose to rain, store indoors. AVERTISSEMENT-Risque de secousse électrique. N'utiliser qu'une prise de courant correctement mise à la terre. Risque de secousse électrique. La rallonge électrique doit rester sèche et ne pas toucher le sol. La protéger des intempéries et la remiser à l'intérieur. FOR ELECTRIC STARTER ASSEMBLY ONLY For 420 C.C. Engines Maximum. 120v., 60Hz., A.C. 13.2Amp, Output Wattage: 700W, Rated Load Speed: 4300 R.P.M. INTERMITTENT DUTY ONLY. Do not crank for longer than 8 seconds without allowing to cool for 10 minutes. Use only SJTW/SJTW-A 3 wire grounded cordset suitable for outdoor use and oil resistant. SEE OWNERS MANUAL. DO NOT USE IN RAIN. Class B Insulation. Assembled in China. Thermally-Protected. POUR LE DÉMARREUR ÉLECTRIQUE SEULEMENT Pour des moteurs de 420 C.C. maximum. 120V., 60Hz., 13.2A, Puissance de sortie: 700W, Vitesse à charge nominale: 4300 tr/min. SERVICE INTERMITTENTSEULEMENT. N'enfoncez pas le bouton du démarreur pour faire tourner le moteur pendant plus que 8 secondes sans laisser le démarreur refroidir pendant 10 minutes.N’utilisez qu’une rallonge à trois fils avec mise à la terre qui est conçue pour être utilisée à l’extérieur et résistant à l’huile, types SJTW/SJTW-A. CONSULTEZ LE MANUEL D'UTILISATION. N’EMPLOYEZ PAS SOUS LA PLUIE. Isolation de classe B. Assemblé en Chine. Isolation thermique. FOR ELECTRIC STARTER ASSEMBLY ONLY For 420 C.C. Engines Maximum. 120v., 60Hz., A.C. 13.2Amp, Output Wattage: 700W, Rated Load Speed: 4300 R.P.M. INTERMITTENT DUTY ONLY. Do not crank for longer than 8 seconds without allowing to cool for 10 minutes. Use only SJTW/SJTW-A 3 wire grounded cordset suitable for outdoor use and oil resistant. SEE OWNERS MANUAL. DO NOT USE IN RAIN. Class B Insulation. Assembled in China. Thermally-Protected. POUR LE DÉMARREUR ÉLECTRIQUE SEULEMENT Pour des moteurs de 420 C.C. maximum. 120V., 60Hz., 13.2A, Puissance de sortie: 700W, Vitesse à charge nominale: 4300 tr/min. SERVICE INTERMITTENTSEULEMENT. N'enfoncez pas le bouton du démarreur pour faire tourner le moteur pendant plus que 8 secondes sans laisser le démarreur refroidir pendant 10 minutes.N’utilisez qu’une rallonge à trois fils avec mise à la terre qui est conçue pour être utilisée à l’extérieur et résistant à l’huile, types SJTW/SJTW-A. CONSULTEZ LE MANUEL D'UTILISATION. N’EMPLOYEZ PAS SOUS LA PLUIE. Isolation de classe B. Assemblé en Chine. Isolation thermique. Chongqing Vision Industry Co.,Ltd Chongqing Vision Industry Co.,Ltd JQ-190 Chongqing Jili Yunfeng Industry(Group) Co.,Ltd ACQD190 JQ-190 Chongqing Jili Yunfeng Industry(Group) Co.,Ltd ACQD190 Label can be printed with either Company Name & Number 777I23017 777I22992 Push to start - Do not run starter more than 10 times at intervals of 5 Seconds On / 5 seconds Off. If engine does not start, consult operators manual. Appuyez pour démarrer - Ne pas utiliser le démarreur plus de 10 fois en appuyant pendant 5 secondes et en relâchant pendant 5 secondes. Si le moteur ne démarre pas, consultez la notice d'utilisation. SERIAL NUMBER BAR CODE LABEL SN: XXxxxx/xxxxxxxxxxxx Lot No. xxxxxxxxxxxx 20 EPA LABEL Notes 21 22 23 To order replacement parts or locate your nearest service dealer call Customer Support at (800) 828-5500. or visit www.troybilt.com to find the nearest authorized dealer in your area. TROY-BILT LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 ">
Link público atualizado
O link público para o seu chat foi atualizado.
