Gardena 1188 Manuel utilisateur

PDF
Document
Gardena 1188 Manuel utilisateur | Fixfr
/

User questions

A P

Patricia A.

How should the switching point regulator be adjusted for different soil types?

For medium soils such as clay humus, use the middle position (the default setting). For sandy soils, turn the regulator to the right for higher humidity requirements. For potting soil, turn it to the left for a drier setting. It is recommended to observe the probe's behavior for 1 to 2 weeks to fine-tune the adjustment.

A P

Patricia A.

How to adjust the switching point based on the soil type?

For medium-textured soils (clay humus) that are non-forest, set the switching point regulator to the middle position, which is the default factory setting. For sandy soils, turn the regulator to the right for higher humidity requirements. For potting soil, turn it to the left for a drier soil setting. It is recommended to observe the sensor's behavior for one to two weeks to further refine the settings.

A P

Patricia A.

How to adjust the device settings for different soil types?

For medium soils (clay humus), use the middle position on the regulator. For sandy soils, turn the regulator to the right for higher humidity settings. For potting soil, turn the regulator to the left for drier soil settings. It is recommended to observe the probe behavior for 1 to 2 weeks to fine-tune the adjustment.

A P

Patricia A.

How to adjust the switching point based on the type of soil?

The switching point adjustment varies by soil type: for medium, non-forest soils, set the regulator to the middle position; for sandy soils, turn it to the right for higher humidity; and for potting soil, turn it to the left for drier soil. It is recommended to observe the sensor for 1 to 2 weeks to fine-tune the setting.

A P

Patricia A.

How to adjust the switching point regulator base on the soil type?

Place the regulator in the middle position for medium soils (clay humus). For sandy soils, turn it to the right for higher humidity, and for flower soil, turn it to the left for a drier setting. It is recommended to observe the sensor for 1 to 2 weeks to fine-tune the adjustment.

Preparing document for printing…
0%