RC4WD Trail Finder 2 Truck 1/10 Scale Builders Kit Manuel utilisateur

Vous trouverez ci-dessous de brèves informations pour Trail Finder 2 Builders Kit. Il s'agit d'un kit de construction à l'échelle 1/10. Suivez les instructions de montage, utilisez les outils recommandés, appliquez du frein filet lorsque cela est nécessaire. Compatible avec plusieurs carrosseries RC4WD. Personnalisez votre camion avec des options de ressorts à lames et d'amortisseurs.

PDF Télécharger

Document

16
Recommended Tools
Hex Drivers (1.5mm, 2mm, 2.5mm)
Thread Lock(blue)
Thread Lock
Cross Wrench
Long Nose Pliers
Tips for Assembly
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Note: Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.
17
1
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Warranty
RC4WD non-electrical products are warranted to be free of defects in materials and workmanship when new. Our limited warranty
does not cover damages due to normal wear and tear, user error of assembly or installation, user modifications, user's failure to
perform routine maintenance, addition of aftermarket parts or option parts. This warranty lasts 30 days after arrival for original
purchaser.
In the event of a defect under this warranty, RC4WD will, at our discretion, replace the product, provided our inspection indicates that
an original defect exists. RC4WD reserves the right to replace any product which is no longer available with a product of comparable
value and function. If RC4WD determines the repair is not covered under warranty guidelines, we will contact you to discuss your
options. If you have any questions, please contact us via email at [email protected].
RC4WD warranties its electronics for 30 days from date of arrival. This covers all electrical items except items that are already noted
on the individual product page.
Los productos no el&eacute;ctricos RC4WD est&aacute;n garantizados como libres de defectos en materiales y mano de obra cuando son nuevos.
Nuestra garant&iacute;a limitada no cubre los da&ntilde;os debidos al desgaste normal, a errores de montaje o instalaci&oacute;n por parte del usuario, a
modificaciones del usuario, a la falta de mantenimiento rutinario por parte del usuario, a la adici&oacute;n de piezas de recambio o a piezas
opcionales. Esta garant&iacute;a dura 30 d&iacute;as despu&eacute;s de la fecha de entrega para el comprador original.
En el caso de un defecto bajo esta garant&iacute;a, RC4WD, a nuestra discreci&oacute;n, reemplazar&aacute; el producto, siempre que nuestra inspecci&oacute;n
indique que existe un defecto original. RC4WD se reserva el derecho de sustituir cualquier producto que ya no est&eacute; disponible por
otro de valor y funci&oacute;n comparables. Si RC4WD determina que la reparaci&oacute;n no est&aacute; cubierta por la garant&iacute;a, nos pondremos en
contacto con usted para discutir sus opciones. Si tiene alguna pregunta, por favor cont&aacute;ctenos por correo electr&oacute;nico a
[email protected].
RC4WD garantiza su electr&oacute;nica por 30 d&iacute;as a partir de la fecha de entrega. Esto cubre todos los art&iacute;culos el&eacute;ctricos, excepto los que
ya est&aacute;n anotados en la p&aacute;gina del producto individual.
Les produits non &eacute;lectriques RC4WD sont garantis comme &eacute;tant exempts de d&eacute;fauts de mat&eacute;riaux et de fabrication lorsqu'ils sont
neufs. La garantie limit&eacute;e ne couvre pas les dommages dus &agrave; l'usure normale, aux erreurs de montage ou d'installation de l'utilisateur,
aux modifications apport&eacute;es par l'utilisateur, au d&eacute;faut d'entretien courant de l'utilisateur, &agrave; l'ajout de pi&egrave;ces de rechange ou de pi&egrave;ces
optionnelles. Cette garantie dure 30 jours &agrave; compter de la date d'arriv&eacute;e de l'acheteur initial.
En cas de d&eacute;faut au titre de cette garantie, RC4WD remplacera, &agrave; notre discr&eacute;tion, le produit, &agrave; condition que notre inspection indique
qu'il s'agit d'un d&eacute;faut d'origine. RC4WD se r&eacute;serve le droit de remplacer tout produit indisponible par un produit de valeur et de
fonction comparables. Si RC4WD d&eacute;termine que la r&eacute;paration n'est pas couverte par les directives de garantie, nous vous
contacterons pour discuter des possibilit&eacute;s qui s'offrent &agrave; vous. Si vous avez des questions, veuillez nous contacter par courriel &agrave;
[email protected].
RC4WD garantit ses appareils &eacute;lectroniques pendant 30 jours &agrave; compter de la date d'arriv&eacute;e. Cette garantie couvre tous les articles
&eacute;lectriques, &agrave; l'exception de ceux qui sont d&eacute;j&agrave; mentionn&eacute;s sur la page de chaque produit.
Alle RC4WD, nicht elektrischen Produkte“ sind garantiert frei von Materialfehlern durch die Produktion und Verarbeitung. Die Garantie
deckt nicht Sch&auml;den aufgrund normaler Abnutzung, Benutzerfehler bei der Montage oder Installation, &Auml;nderungen durch den
Benutzer, unterlassen der routinem&auml;&szlig;igen Wartung durch den Benutzer, hinzuf&uuml;gen von Fremdteilen oder Optionsteile.Diese Garantie
betr&auml;gt 30 Tage nach Kauf und Erhalt der Ware durch den K&auml;ufer. Im Falle eines Mangels im Rahmen dieser Garantie, wird RC4WD
nach ermessen und sofern nach einer Kontrolle ein urspr&uuml;nglicher Defekt vorliegt, das Produkt austauschen.
RC4WD beh&auml;lt sich das Recht vor, Produkte die nicht mehr erh&auml;ltlich sind, mit einem gleichwertigem Produkt mit vergleichbarer
Funktion zu tauschen.
Wenn die Reklamation nicht mehr unter der Garantie f&auml;llt, wird Sie RC4WD f&uuml;r weitere L&ouml;sungen kontaktieren. Bei Fragen
kontaktieren Sie uns bitte per E-Mail unter [email protected].
18
2
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Instruction Manual Symbols Key
Apply Thread Lock
Apply Grease
Glue
Trim with Hobby Knife
CA Glue
Remove
Cut with Scissors
Repeat or Build Multiple
Build Right and Left
Paint
Attention
Build Front and Rear
Tips for Assembly
■ Use good quality hex drivers to avoid stripping screw heads.
■ Open kit bags in order of assembly steps.
■ Use “Step” index for quantity and size of hardware to be used for assembly.
■ Do not over tighten screws.
■ Use thread lock sparingly on metal parts.
Recommendations for building your RC4WD Trail Finder 2 Truck Kit
1. Carefully remove all parts from bags and sort them. Make sure to use threadlock on all
screws in aluminum.
2. Do not over-tighten screws. Stripping screw heads and holes during assembly can
happen if you are using too much force.
19
3
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
150-0061
Step 1
X4
150-0061
M3 x 6mm BHCS
150-0061
Step 2
X8
150-0062
M3 x 8mm BHCS
150-0062
150-0062
4
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 3-1
X1
M3 x 14mm
BHSTS
Z-B0029
150-0063
X1
150-0066
M3 x 16mm BHCS
X1
150-0063
M3 x 10mm BHCS
150-0066
M3 x 14mm BHSTS
Z-B0029 is included in this set. The following is an installation
demonstration. You can choose whether to install it according to your
needs. It's compatible with 1982 Toyota Pickup Hard Body Complete Set.
Step 3-2
150-0363
X1
M3 x 14mm
BHSTS
X1
150-0063
M3 x 10mm BHCS
150-0363
Z-B0112
Z-B0108
150-0063
Z-B0108
X1
150-0066
M3 x 16mm BHCS
X2
150-0363
M3 x 8mm FHSTS
M3 x 14mm BHSTS
150-0066
The Z-B0108 and Z-B0112 are compatible with RC4WD Chevrolet Blazer
Hard Body Complete Set. Below is the installation demonstration.
5
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 3-3
X1
M3 x 14mm
BHSTS
X2
150-0063
M3 x 10mm BHCS
150-0363
150-0363
Z-B0112
Z-B0205
150-0063
Z-B0205
X1
150-0066
M3 x 16mm BHCS
X2
150-0363
M3 x 8mm FHSTS
M3 x 14mm BHSTS
150-0066
The Z-B0205 and Z-B0112 are compatible with RC4WD 1985 Toyota
4Runner Hard Body Complete Set. Below is the installation demonstration.
Step 4
X4
150-0258
M3 x 12mm BHSTS
150-0258
150-0258
6
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 5
150-0288
X4
175-0007
M3 Black Lock Nut
X4
150-0288
M3 x 15mm
Shoulder Screw
150-0288
175-0007
175-0007
Step 6
150-0064
X1
150-0062
M3 x 8mm BHCS
150-0063
X1
150-0063
M3 x 10mm BHCS
150-0062
X1
150-0064
M3 x 12mm BHCS
7
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
150-0062
Step 7
X2
150-0064
M3 x 12mm BHCS
150-0064
X2
150-0062
M3 x 8mm BHCS
Step 8
X2
150-0062
M3 x 8mm BHCS
150-0062
21
8
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 9
X2
150-0100
M3 x 8mm FHCS
150-0100
Step 10
X1
150-0063
M3 x 10mm BHCS
150-0063
22
9
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 11
X4
150-0063
M3 x 10mm BHCS
X3
150-0064
M3 x 12mm BHCS
150-0062
X3
150-0062
M3 x 8mm BHCS
150-0064
150-0063
150-0063
150-0062
Step 12-1
150-0064
150-0063
Z-B0029 is included in this set. The following is an installation
demonstration. You can choose whether to install it according to your
needs. It's compatible with 1982 Toyota Pickup Hard Body Complete Set.
X1
150-0066
M3 x 16mm BHCS
X1
150-0066
M3 x 14mm
BHSTS
M3 x 14mm BHSTS
Z-B0029
23
10
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 12-2
The Z-B0108 and Z-B0112 are compatible with RC4WD Chevrolet Blazer
Hard Body Complete Set. Below is the installation demonstration.
X1
150-0066
M3 x 16mm BHCS
150-0066
X1
M3 x 14mm
BHSTS
M3 x 14mm BHSTS
X2
150-0363
M3 x 8mm FHSTS
150-0363
Z-B0108
Z-B0108
150-0363
Step 12-3
Z-B0112
The Z-B0205 and Z-B0112 are compatible with RC4WD 1985 Toyota
4Runner Hard Body Complete Set. Below is the installation demonstration.
X1
150-0066
M3 x 16mm BHCS
X1
M3 x 14mm
BHSTS
X2
Z-B0205
150-0363
M3 x 8mm FHSTS
150-0363
Z-B0205
150-0363
24
11
Z-B0112
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 13
X1
150-0202
150-0202
M3 Drive Shaft Pin
Step 14
X2
150-0100
M3 x 8mm FHCS
150-0100
12
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 15
150-0202
X1
150-0202
M3 Drive Shaft Pin
Step 16
X2
150-0062
M3 x 8mm BHCS
150-0062
13
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
150-0099
Step 17
X4
150-0099
M3 x 6mm FHCS
150-0100
Step 18
X4
150-0100
M3 x 8mm FHCS
14
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 19
Z-B0029
X2
BHSTS
M3 x 14mm
150-0065
If you want to fit the RC4WD 1985 Toyota 4Runner Hard Body Complete
Set, please do not install the rear body posts.
Step 20
Attach bumper
mount 2 on the rear
of the chassis.
1
Optional (Not used)
2
Step 21
3
Step 26
15
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 21
150-0099
X2
150-0099
M3 x 6mm FHCS
150-0099
Step 22
Choose a 2 or 3 leaf spring configuration. Installation
method is the same for both.
X4
150-0066
M3 x 16mm BHCS
Z-S2135
Z-S2135
Z-S2135
Z-S2135
150-0066
150-0066
For alternate leaf over axle configuration install, see pages 26 to 29.
26
16
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
150-0288
Step 23
X4
150-0288
M3 x 15mm
Shoulder Screw
150-0288
175-0007
X4
175-0007
M3 Black Lock Nut
比例 1.000
175-0007
150-0288
Step 24
Choose a 2 or 3 leaf spring configuration. Installation
method is the same for both.
X4
150-0066
M3 x 16mm BHCS
Z-S2135
Z-S2135
Z-S2135
Z-S2135
150-0066
150-0066
For alternate leaf over axle configuration install, see pages 26 to 29.
27
17
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 25
X4
150-0288
M3 x 15mm
Shoulder Screw
150-0288
175-0007
X4
175-0007
M3 Black Lock Nut
175-0007
150-0288
Step 26
150-0099
X2
150-0099
M3 x 6mm FHCS
150-0099
28
18
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 27
X2
150-0067
M3 x 18mm BHCS
X2
175-0007
M3 Black Lock Nut
X2
200-0035
M3 X 2mm Spacer
Z-D0056 (60mm Shock)
175-0007
150-0067
200-0035
Step 28
X2
150-0066
M3 x 16mm BHCS
175-0007
200-0036
X2
175-0007
M3 Black Lock Nut
X2
200-0036
M3 X 3mm Spacer
150-0066
29
19
比例 1.000
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 29
Install internal shock spring at this stage if desired.
X2
150-0065
M3 x 14mm BHCS
200-0036
X2
150-0066
M3 x 16mm BHCS
X2
150-0065
200-0035
M3 X 2mm Spacer
X2
200-0036
M3 X 3mm Spacer
200-0035
Z-D0058 (80MM Shock)
150-0066
150-0195
Step 30
X2
150-0195
M3 x 8mm BHSTS
20
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 31
CORRECT ALIGNMENT
INCORRECT ALIGNMENT
Step 32
150-0202
150-0202
150-0202
150-0202
X4
150-0202
M3 Drive Shaft Pin
21
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 33
Z-S0601 (60mm)
Z-S0398
X2
150-0218
M3 x 10mm
Set Screw
150-0218
Z-S0401
150-0218
Z-S0398
Z-S0398
Use Z-S0504 when leaf spring
is installed above the axle.
Z-S0401
Use Z-S0194 when leaf spring
is installed under the axle.
Z-S0398
Step 34
150-0063
X1
150-0063
M3 x 10mm BHCS
X1
150-0068
M3 x 20mm BHCS
150-0068
X1
175-0007
M3 Black Lock Nut
175-0007
22
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 35
Insert the screw into the outermost threaded hole. Choose whether to install front
and rear bumpers according to your needs.
X2
150-0194
M3 x 12mm
Set Screw
150-0194
Step 36
X2
Insert the screw into the second threaded
hole. Choose whether to install front and rear
bumpers according to your needs.
150-0194
4
4
150-0194
M3 x 12mm
Set Screw
23
3
2
1
3
2
1
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Step 37
Assembly completed. This chassis kit is not specific to any
particular body; it's designed for versatility with any body
compatible with the Trail Finder 2 Chassis.
Compatible with RC4WD 1982 Toyota Pickup Hard
Body Complete Set. Z-B0029 is included in this set.
Step 38
M3x8mmBHSTS
Z-B0029
Z-B0029
31
24
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Compatible with RC4WD Chevrolet Blazer Hard
Body Complete Set.
Step 39
M3x8mmBHSTS
Compatible with RC4WD 1985 Toyota 4Runner
Hard Body Complete Set.
Step 40
M3x8mmBHSTS
Z-B0112
Z-B0205
Z-B0205
Z-B0112
32
25
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
* Leaf Over Axle Installation Instructions, for Leaf Over Conversion instructions scan QR Code on page (Page 36).
If you want to change the direction of the axle housing, please refer to steps A to K.
Optional Steps
Install the leaf spring
to the upper part of
the axle.
Choose a 2 or 3 leaf spring configuration. Installation
method is the same for both.
150-0063
150-0063
Instale la ballesta en la parte superior
del eje.
Installez le ressort &agrave; lames sur la partie
sup&eacute;rieure de l'essieu.
Montieren Sie die Blattfeder am
oberen Teil der Achse.
X4
150-0063
M3 x 10mm BHCS
Optional Steps
Install the leaf spring
to the upper part of
the axle.
Choose a 2 or 3 leaf spring configuration. Installation
method is the same for both.
150-0063
150-0063
Instale la ballesta en la parte superior
del eje.
Installez le ressort &agrave; lames sur la partie
sup&eacute;rieure de l'essieu.
Montieren Sie die Blattfeder am
oberen Teil der Achse.
X4
150-0063
M3 x 10mm BHCS
33
26
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Remove the short male side and replace it with the
longer male side
Optional Steps
150-0288
Installing the Axle.
Instalaci&oacute;n del eje.
Installation de l'essieu.
Einbau der Achse.
X4
150-0288
150-0288
M3 x 15mm
Shoulder Screw
175-0007
175-0007
X4
150-0288
150-0288
175-0007
M3 Black Lock Nut
㹣√1.000
Remove the short male side and replace it with the
longer male side
Optional Steps
Installing the Axle.
Instalaci&oacute;n del eje.
Installation de l'essieu.
150-0288
150-0288
Einbau der Achse.
X4
175-0007
150-0288
M3 x 15mm
Shoulder Screw
175-0007
150-0288
X4
150-0288
175-0007
M3 Black Lock Nut
㹣√1.000
34
27
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
比例 1.000
Optional Steps
Converts a short shock head to a long shock head.
Install rear shock
absorbers.
Instale amortiguadores traseros.
Installez les amortisseurs arri&egrave;re.
Hintere Sto&szlig;d&auml;mpfer einbauen.
X2
150-0066
M3 x 16mm BHCS
X2
200-0035
M3 X 2mm Spacer
200-0035
150-0066
200-0035
150-0066
Optional Steps
Converts a short shock head to a long shock head.
Install front shock
absorbers and install
connecting rods.
Instale amortiguadores delanteros
e instale bielas.
Installez les amortisseurs avant et
installez les bielles.
Vordere Sto&szlig;d&auml;mpfer einbauen
und Pleuel einbauen.
X1
150-0063
M3 x 10mm BHCS
150-0063
175-0007
X2
150-0067
M3 x 18mm BHCS
X2
175-0007
M3 Black Lock Nut
175-0007
150-0067
150-0067
X2
200-0035
M3 X 2mm Spacer
28
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Optional Steps
X2
Z-S0504
150-0063
M3 x 10mm BHCS
150-0063
150-0063
29
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
* Change the direction of the axle housing.
A
CONVERSION
B
Remove the
knuckles.
150-0062
Quitar los nudillos.
150-0062
Retirez les articulations.
Entfernen Sie die Kn&ouml;chel.
X4
150-0062
M3 x 8mm BHCS
150-0062
150-0062
30
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
C
Remove the axle
shaft.
Retire el semieje.
Retirer l'arbre d'essieu.
Die Achswelle ausbauen.
D
Remove the pinion
gear.
Retire el pi&ntilde;&oacute;n.
Retirez le pignon.
Entfernen Sie das Ritzel.
X10
150-0003
M2 x 5mm SHCS
150-0003
31
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
E
Remove the ring
gear and diff cover.
Retire el engranaje anular y la
cubierta del diferencial.
Retirez la couronne dent&eacute;e et le
couvercle du diff&eacute;rentiel.
Entfernen Sie das Zahnrad und
die Differentialabdeckung.
X4
150-0006
M2 x 10mm SHCS
150-0006
F
180&deg;
First, rotate the Axle Case Housing 180 degrees.
Rotate axle housing
180&deg; then reinstall
the ring gear.
Gire la carcasa del eje 180&deg; y luego
vuelva a instalar el engranaje
anular.
Faites pivoter le carter d’essieu de
180&deg; puis r&eacute;installez la couronne
dent&eacute;e.
Drehen Sie das Achsgeh&auml;use um
180&deg; und bauen Sie dann das
Zahnrad wieder ein.
36
32
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
G
Reinstall the diff
cover.
Reinstalar la cubierta del
diferencial.
R&eacute;installer le couvercle du
diff&eacute;rentiel.
Installieren Sie die
Diff-Abdeckung erneut.
X4
150-0006
M2 x 10mm SHCS
150-0006
H
Reinstall the pinion
gear.
Vuelva a instalar el pi&ntilde;&oacute;n.
R&eacute;installer le pignon.
Bauen Sie das Ritzel wieder ein.
X10
150-0003
M2 x 5mm SHCS
150-0003
37
33
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
I
Reinstall the axle
shafts.
Reinstalar los semiejes.
R&eacute;installer les arbres d'essieu.
Bauen Sie die Achswellen wieder ein.
J
Reinstall the
knuckles.
150-0062
150-0062
Reinstalar los nudillos.
R&eacute;installer les articulations.
Bauen Sie die Kn&ouml;chel wieder
ein.
X4
150-0062
M3 x 8mm BHCS
150-0062
150-0062
38
34
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
K
Conversion
Complete.
Conversi&oacute;n completada
Conversion termin&eacute;e
Konvertierung abgeschlossen
39
35
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
Leaf Over Axle Conversion
Instructions
比例 1.000
36
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
REPLACEMENT PARTS
Piezas de repuesto / Pi&egrave;ces de rechange / Ersatzteile
Z-A0080
Z-A0081
Z-B0029
Z-C0018
Z-D0056
Z-D0058
Z-S0047
Z-S0149
Z-S0194
Z-S0274
Z-S0398
Z-S0401
Z-S0475
Z-S0504
Z-S0552
Z-S0592
Z-S0593
Z-S0597
Z-S0598
Z-S0678
Z-S0802
Z-S0852
Z-S0898
Z-S1732
Z-S1815
Z-S2135
Z-U0024
Z-U0028
Yota II Ultimate Scale Cast Axle (Front)
Yota II Ultimate Scale Cast Axle (Rear)
Trail Finder 2 Plastic Body Posts
Trail Finder 2 Chassis Set
RC4WD Bilstein SZ Series Shock Absorbers (60mm)
RC4WD Bilstein SZ Series Shock Absorbers (80mm)
Leaf Spring Shackles &amp; Mounts Kit
RC4WD Plastic Punisher Shaft V2 (98mm - 103mm / 3.86&quot; - 4.06&quot;) 5mm Hole
RC4WD 120mm Hardened Steering Link (FOA)
RC4WD Marlin Crawler Side Plastic Sliders for Trail Finder 2 V2
M3 Mini Plastic Rod End (20x)
M3 Offset Short Plastic Rod End (20x)
RC4WD Rear Plastic Tube Bumper for Trail Finder 2
RC4WD 101mm Hardened Steering Link
Heavy Duty Nylon Strap Lock (5)
Fuel Cell Radio Box
Trail Finder 2 Bumper Mounts
Shock Hoops for Trail Finder 2 Chassis
Transfer Case mount for Trail Finder 2 Chassis
Electronics Top Plate w/Servo Mounts For Trail Finder 2
R3 Single Speed Transmission Mounts
RC4WD Marlin Crawler Front Winch Bumper w/Stinger for Trail Finder 2 V2
TF2 Long Drive Shaft Coupling for R3 Single Speed
RC4WD Assembly Combo Pack (Oil, Thread Lock, Grease)
Super Soft Flex Leaf Springs for TF2 (4)
Leaf Under Mounts for Yota 2 / K44 Axles
Hammer Transfer Case (1.47/1)
R3 Scale Single Speed Transmission
37
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
OPTIONAL PARTS
Partes opcionales / Pi&egrave;ces en option / Optionale teile
Z-A0071
Z-A0072
Z-A0096
Z-A0101
Z-D0001
Z-D0004
Z-D0005
Z-D0012
Z-D0015
Z-D0034
Z-D0036
Z-D0038
Z-D0045
Z-D0072
Z-D0075
Z-D0077
Z-D0078
Z-D0082
Z-D0083
Z-E0001
Z-E0002
Z-E0003
Z-E0004
Z-E0005
Z-E0009
Z-E0035
Z-E0041
Z-E0045
Z-E0065
Z-E0067
Z-E0069
Z-E0075
Z-E0090
Z-E0113
Z-E0118
Z-E0119
Z-E0125
Z-R0006
Z-R0009
Z-S0003
Z-S0004
Z-S0006
Z-S0056
Z-S0075
Z-S0093
Z-S0196
Z-S0256
Z-S0407
Z-S0477
Z-S0565
Z-S0570
Z-S0579
Z-S0590
Z-S0603
Z-S0682
Z-S0702
Z-S0753
Z-S0765
RC4WD Yota II Ultimate Scale Cast Front Axle V2 (Chrome)
RC4WD Yota II Ultimate Scale Cast Rear Axle (Chrome)
K44 Ultimate Scale Cast Rear Axle
K44 Ultimate Scale Cast Front Axle
The Ultimate Scale Shocks 90mm (Silver)
The Ultimate Scale Shocks 70mm (Silver)
The Ultimate Scale Shocks 80mm (Silver)
RC4WD Superlift Superide 80mm Scale Shock Absorbers
RC4WD Superlift Superide 90mm Scale Shock Absorbers
RC4WD 70mm Old Man Emu Nitrocharger Sport Shocks by ARB
RC4WD 80mm Old Man Emu Nitrocharger Sport Shocks by ARB
RC4WD 90mm Old Man Emu Nitrocharger Sport Shocks by ARB
Super Scale 70mm White Shocks with Internal Springs
RC4WD Bilstein SZ Series 80mm Scale Shock Absorbers
RC4WD Bilstein SZ Series 90mm Scale Shock Absorbers
RC4WD Rancho RS9000 XL Shock Absorbers 80mm
RC4WD Rancho RS9000 XL Shock Absorbers 90mm
RC4WD Bilstein SZ Series 60mm Scale Shock Absorbers
RC4WD Bilstein SZ Series 70mm Scale Shock Absorbers
540 Crawler Brushed Motor 80T
540 Crawler Brushed Motor 65T
540 Crawler Brushed Motor 55T
540 Crawler Brushed Motor 45T
540 Crawler Brushed Motor 35T
RC4WD 1/10 Mini Warn 9.5cti Winch
Twister High Torque Metal Gear Digital Servo
RC4WD Brushed 45T Boost Rebuildable Crawler 540 Motor
RC4WD Brushed 35T Boost Rebuildable Crawler 540 Motor
540 Crawler Brushed Motor 20T
540 Crawler Brushed Motor 27T
RC4WD 1/8 Warn Zeon 10 Winch
RC4WD 1/10 Warn 8274 Winch
RC4WD 6-Cell 3000mAh NIMH Battery Pack
Outcry III Waterproof ESC
Outcry Extreme Speed Controller ESC w/ Program Card
RC4WD 1/10 Warn 9.5cti-s Winch
Twister Extreme Hi-Voltage Coreless Metal Gear Digital Waterproof Servo
XR4 4-Channel 2.4Ghz Transmitter/Receiver Radio
XR3 3-Channel 2.4Ghz Transmitter/Receiver Radio
#3 Aluminum Bumper Mount For Trail Finder 2
#2 Aluminum Bumper Mount for Trail Finder 2
#1 Aluminum Bumper Mount For Trail Finder 2
Tough Armor Side Steel Sliders for Trail Finder 2
King Kong Mini Tow Shackle
King Kong Tow Shackle
Scale Aisin/Yota Style Hubs
RC4WD Front Inner Fender Set for 1982 Toyota Pickup
RC4WD 12mm Mini Hex Wheel Widener Set (+15mm)
RC4WD Tough Armor Double Steel Tube Rear Bumper for Trail Finder 2
3 Link Kit For Trail Finder 2 Front Axle w/Panhard Setup
Red Super Soft Flex Leaf Springs (4)
Tough Armor Rear Bumper for Trail Finder 2 w/Hitch Mount
Big Boss Fender Flares for Tamiya Hilux and RC4WD Mojave Body
4 Link Kit For Trail Finder 2 Rear Axle
RC4WD Lift Kit for 1982 Toyota Pickup/Mojave II
RC4WD Rebel Off Road Aluminum Hawse Fairlead
RC4WD Marlin Crawler Side Metal Sliders for Trail Finder 2
Tough Armor Front Tube Bumper w/Winch Mount for Trail Finder 2
38
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
OPTIONAL PARTS
Partes opcionales / Pi&egrave;ces en option / Optionale teile
Z-S0768 RC4WD Adjustable Rear Shock Mounts for Trail Finder 2
Z-S0782 Anti Wrap Bar for Yota 2 Axles
Z-S0822 Heavy Duty Metal Servo Arm 25t Futaba
Z-S0907 Yota II Scale Diff Cover
Z-S1093 RC4WD Billet Aluminum Fuel Cell Radio Box (Black)
Z-S1095 RC4WD Adjustable Drop Hitch (Short)
Z-S1118 Scale Steel Punisher Shaft V2 (90mm - 115mm / 3.54'' - 4.53'')
Z-S1122 RC4WD Billet Aluminum Fuel Cell Radio Box (Red)
Z-S1237 King Kong Tow Shackle (Orange)
Z-S1295 RC4WD ARB Diff Cover For The Yota II Axle (Red)
Z-S1310 RC4WD 1/10 Warn Hawse Polished Aluminum Fairlead
Z-S1315 RC4WD 1/10 Warn Hawse Fairlead (Black)
Z-S1373 RC4WD Marlin Crawler Rear Steel Tube Bumper for Trail Finder 2
Z-S1476 Super Scale Steel Leaf Springs for TF2 &amp; Tamiya Bruiser (2)
Z-S1496 RC4WD Marlin Crawler Front Winch Bumper for Trail Finder 2
Z-S1498 RC4WD 1/10 Viking Roller Fairlead for Warn 9.5cti Winch
Z-S1587 RC4WD Teraflex Revolver Z-Box for Trail Finder, F-350, Hilux, Tundra
Z-S1594 RC4WD Teraflex Revolver Shackle
Z-S1627 Motor Mount for R4 Transmission
Z-S1777 Low Profile Delrin Transfer Case Mount for TF2
Z-S1789 RC4WD Marlin Crawler Front Winch Bumper w/Stinger for Trail Finder 2
Z-S1825 RC4WD 12mm Hex Wheel Widener Set (+7mm)
Z-S1827 Tough Armor Rear Tube Bumper w/Hitch Mount for Trail Finder 2
Z-S1830 Tough Armor Rear Steel Tube Bumper w/Hitch Mount for Trail Finder 2
Z-S1845 Tough Armor Front Winch Bumper for Mojave II 2/4 Door Body Set
Z-S1851 Low Profile Delrin Skid Plate for Std. TC (TF2)
Z-S1870 Hitch Mount for RC4WD TF2
Z-S1882 Trail Finder 2 Aluminum Side Body Posts
Z-S1923 Reverse Mount Spring Hanger Conversion Kit for TF2 and TF2 LWB
Z-S1924 RC4WD Rancho Diff Cover for Yota II Axle
Z-S1949 RC4WD Rancho Adjustable Steering Stabilizer (70-100mm)
Z-T0051 Mud Thrashers 1.9&quot; Scale Tires
Z-T0107 RC4WD BFGoodrich All Terrain K02 1.7” Scale Tires
Z-T0152 Scrambler Offroad 1.55&quot; Scale Tires
Z-T0177 RC4WD Goodyear Wrangler Duratrac 1.55&quot; 4.19&quot; Scale Tires
Z-T0179 RC4WD Falken Wildpeak M/T 1.7&quot; Tires
Z-T0189 RC4WD BFGoodrich Krawler T/A KX 1.7&quot; Scale Tires
Z-T0190 RC4WD BFGoodrich Mud Terrain T/A KM2 1.55&quot; Scale Tires
Z-T0191 RC4WD BFGoodrich Mud Terrain T/A KM3 1.7&quot; Tires
Z-T0192 RC4WD BFGoodrich Mud Terrain T/A KM3 1.9&quot; Tires
Z-T0225 RC4WD BFGoodrich Mud Terrain KM 1.9&quot; Scale Tires
Z-W0014 RC4WD Center Line 1.55&quot; Scorpion Deep Dish Wheels
Z-W0041 RC4WD XD 1.7&quot; XD849 Grenade 2 Deep Dish Beadlock Wheels
Z-W0086 RC4WD Warn 1.7&quot; Epic Jack Hammer Wheels
Z-W0118 RC4WD Ballistic Off Road Morax 1.7&quot; Beadlock Wheels
Z-W0122 RC4WD Enforcer 1.9&quot; Beadlock Wheels
Z-W0200 RC4WD Fuel Off-Road Maverick 1.9&quot; Beadlock Wheels
Z-W0266 RC4WD Benchmark 1.7&quot; Beadlock Wheels
Z-W0274 RC4WD 1911 1.9'' Beadlock Wheels
Z-W0292 RC4WD Raceline Combat 1.55&quot; Beadlock Wheels
Z-W0333 RC4WD Fuel Off-Road 1.55” Zephyr Beadlock Wheels (Gunmetal)
Z-X0027 RC4WD Scale Rear Hitch Carrier
Z-X0053 RC4WD Type B Machine Front Winch Bumper for TF2
VVV-C0422 Trifecta Front Bumper for Mojave II 2/4 Door Body Set (Black)
VVV-C0432 Kangaroo Front Bumper for Mojave II 2/4 Door Body Set (Black)
VVV-C0434 Kangaroo Front Bumper w/Lights for Mojave II 2/4 Door Body Set (Black)
VVV-C0709 Wood Flatbed for TF2 Mojave Body
VVV-C0710 Wood Flatbed w/ Mudflaps for TF2 Mojave Body
VVV-C0712 Kober Rear Bed W/ Mud Flaps for TF2 Mojave Body (Black)
39
RC4WD Trail Finder 2 Truck
1/10 Scale Builders Kit
737 N. Gateway St.
Visalia, CA 93291
www.RC4WD.com
[email protected]
100-0143
">

Bonjour ! Je suis votre assistant IA pour le manuel du RC4WD Trail Finder 2 Builders Kit. Ce manuel vous guidera à travers le processus d'assemblage de votre camion RC, avec des instructions détaillées et des conseils utiles. Je connais les outils recommandés, l'utilisation du frein filet et les options de configuration des ressorts à lames. Posez vos questions, je suis là pour vous aider !

Afficher les suggestions associées

L'assistant écrit

L'assistant n'est pas disponible. Veuillez réessayer plus tard.

Caractéristiques clés

Kit de construction à l'échelle 1/10
Utilisation de frein filet et de graisse pour l'assemblage
Compatible avec les carrosseries RC4WD Toyota, Chevrolet Blazer, etc.
Options de configuration des ressorts à lames
Instructions pour l'installation des amortisseurs et des barres de direction
Instructions pour la conversion des ressorts à lames sur l'essieu

Questions fréquemment posées

Des tournevis hexagonaux (1,5 mm, 2 mm, 2,5 mm), du frein filet (bleu), une clé en croix et une pince à long bec sont recommandés.

Utilisez du frein filet lorsque vous mettez des vis en métal dans des pièces métalliques. Les étapes marquées d'un astérisque (*) nécessitent du frein filet.

Les produits non électriques RC4WD sont garantis contre les défauts de matériaux et de fabrication lorsqu'ils sont neufs pendant 30 jours après l'arrivée pour l'acheteur original. Mais ne couvre pas les dommages dus à l'usure normale.