GoodHome 148182_s2_s2 30; 40; 50; 60cm Wide Base Cabinets Manuel utilisateur

PDF
Document
GoodHome 148182_s2_s2 30; 40; 50; 60cm Wide Base Cabinets Manuel utilisateur | Fixfr
/

User questions

G F

Michael G.

How to adjust and align the front panel?

To align the front panel, first ensure the drawer is perfectly square at a 90° angle using the AR pieces. Then, install the front panel supports (parts Y and Z), which include adjustment screws to modify the height and lateral position of the panel.

G F

Michael G.

How to adjust and align the front panel of the drawer?

Ensure the drawer is perfectly square at a 90-degree angle using the AR pieces. Install the front panel supports (Y and Z parts), which allow for height and lateral adjustments using the integrated screws.

G F

Michael G.

How to adjust and align the drawer front panel?

To align the front panel, ensure the drawer is perfectly square (90°) using the AR supports before attachment. The front panel's height and lateral position are then adjusted using the Y and Z mounting supports.

G F

Michael G.

How to adjust and align the front panel?

Instructions for adjusting and aligning the front panel are found in the 'Assemblage' section. Ensure the drawer is perfectly square (90°) using pieces AR before fixing the front panel (Step 15), where supports (pieces Y and Z) are installed and typically include adjustment screws for height and lateral positioning. Always verify product stability and regularly check that the slide rails and mounting brackets are tightened.

Preparing document for printing…
0%