Globaltronics GT-WT-03 Weather Station Manuel utilisateur

PDF Download
Document
GT-WS-17v, GT-WS-17h, GT-WT-03: Mode d'emploi + IA | Fixfr

User questions

K V

Michael K.

What causes the outdoor sensor temperature to flash on the base every day at 1 AM?
A flashing snowflake symbol indicates a risk of frost when the temperature measured by the radio sensor is between 1°C and -1°C. If the temperature remains below -1°C for an extended period, the snowflake symbol is displayed continuously. It is possible that the temperature fluctuates around these values at 1 AM, which would explain the flashing.
K V

Michael K.

Why does the display cycle between sensor 1, 2, and 3?
Cycling between sensors 1, 2, and 3 may be related to the radio sensor selection function. Use the appropriate button to switch from one sensor to another or activate automatic switching between all sensors. Check if the automatic switching mode is enabled and, if one wants to display data from a single sensor continuously, manually select the desired sensor with the appropriate button.
K V

Michael K.

How can automatic switching between sensors be disabled?
To disable automatic switching between sensors, press the button on the control panel until the screen only displays the number of the sensor to be monitored continuously (1, 2, or 3). Ensure the symbol indicating automatic scrolling between sensors is no longer displayed. This should keep the display on the selected sensor without automatically switching to the others.
K V

Michael K.

Why does automatic scrolling resume at 1 AM?
It is possible that the weather station performs some kind of automatic reset or synchronization at this time, which could inadvertently reactivate sensor scrolling. Verify the time and date settings and reset the weather station. Also, check for any nearby electronic devices that could cause interference with the sensor signal at that specific time.
Preparing document for printing…
0%