Thomson TCH 301 E Manuel utilisateur

PDF
Document
Thomson TCH 301 E Manuel utilisateur | Fixfr
/

User questions

E K

James E.

How to operate the Thomson TCH 300 freezer?

To operate the Thomson TCH 300 freezer, install it in a dry, ventilated room with 10 cm of space on the sides. Clean the interior, let it run empty for 2-3 hours. Adjust the temperature with the external button (1 to 5, 5 being the coldest), setting it to the coldest position at least 2 hours before adding food. The green indicator light shows power, the red indicator light shows an excessively high internal temperature.

E K

James E.

How to operate the Thomson TCH 300 freezer?

To operate your Thomson TCH 300 freezer, install it in a dry, well-ventilated room, 10 cm away from any heat source. Clean the interior, then let it run empty for 2 to 3 hours. To adjust the temperature, use the external knob (1 being the least cold and 5 the coldest). For first use, set it to the coldest position at least 2 hours before placing food inside, then adjust to a normal setting. The green indicator light shows the power is on, and the red indicator light signals an internal temperature that is too high.

E K

James E.

What are the installation and initial startup instructions for the Thomson TCH 300 freezer?

Install the device in a dry area with 10 cm of clearance on each side for ventilation. Before use, clean the interior and let the device run empty for 2 to 3 hours. Set the thermostat to the coldest setting at least 2 hours before adding food, then return it to a normal setting.

E K

James E.

How to set up and operate the freezer?

Install the unit with 10cm of clearance, clean the interior, and let it run empty for 2-3 hours. Use the thermostat (1-5) to adjust the temperature, setting it to the coldest level for 2 hours before adding food.

E K

James E.

How to operate the Thomson TCH 300 freezer?

Install the device in a dry area with 10cm of clearance on each side. Run it empty for 2 to 3 hours before adding food. Use the external dial to adjust temperature (1 to 5). A green light indicates power, while a red light warns of high internal temperature.

Preparing document for printing…
0%